hp ballpark
 

I have a 385 lt1 being put together and wondering what the horsepower will be. It's fully forged with 3.75 crank, 5.7 rods, and 11:1 cr. A lunati cam #60122 with 231/239 duration and 535/550 lift w/1.5 rockers. Any input is great. Just trying to gather parts for it. Thanks.

stock heads?

what valvetrain?

Might check here: http://www.csgnetwork.com/automotiveconverters.html :)

Stock P&P heads, 2.02/1.60 valves, patriot performace springs, and Pro mag rockers.

Depending how good the heads are, I guess 410 to the wheels. Prety basic setup. I would spend more money on the heads and cam.

Yeah it'll all come in time. This is my first motor build so gotta start somewhere. I am really just trying to figure out my fuel system and drivetrain stuff before I get the motor back.

400+ to the wheels at least. 410 seems reasonable, thats in the ball park.

I have the same cam as you btw, no dyno numbers. I have idle videos if you wish to see them.

SWEET! I had the cam in my stock short block before this. Thanks tho.