LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

convertable leak... please help

Thread Tools
 
Search this Thread
 
Old Mar 2, 2003 | 06:46 PM
  #1  
PumpkinKingZ28's Avatar
Thread Starter
Registered User
 
Joined: Feb 2003
Posts: 84
From: Houston,TX
convertable leak... please help

i bought my car not too long ago and was hoping for a better quality vehicle than my previous pos. well everything is great about the car but one problem, it leaks. its not a bad leak just a small one on door windows, and a little where the side mirrors are. i heard that the camaro has window adjustments, is this true, could this be the problem? i was also thinking about changing the weather striping. does anyone have any info about this. thanks for the help. Its a convertable
Old Mar 2, 2003 | 07:32 PM
  #2  
Josh'95Z28conv's Avatar
Registered User
 
Joined: Feb 2003
Posts: 1,553
From: San Antonio, Texas
I have a '95 convertable, and it leaks in the same spots. At the top of the window, and by the side mirrors. Its a camaro thing, I think, and not a convertable thing. I think replacing the weather stripping would take care of it, but I havnt tried yet. If there are any adjustments, I would like to know as well.
Old Mar 2, 2003 | 07:39 PM
  #3  
PumpkinKingZ28's Avatar
Thread Starter
Registered User
 
Joined: Feb 2003
Posts: 84
From: Houston,TX
josh95, do you like the spec stage 2 clutch? i had mine replaced a few months ago and i was trying to get a good clutch but the one the put in is called stall clutch i think, i couldnt understand his accent. its a good clutch, but i wouldnt know the difference between a stock clutch and an aftermarket clutch, but does this sound like a brand, or did i misunderstand? thanks
Old Mar 2, 2003 | 07:45 PM
  #4  
gb95zconv's Avatar
Registered User
 
Joined: Jul 2000
Posts: 1,428
From: Woodstock,Georgia
Mine leaks alittle also at the top corner of the windshield and door in heavy rain.....Hey its a big improvement over my 65 Mustang conv.
Old Apr 13, 2003 | 09:47 AM
  #5  
darylkern's Avatar
Registered User
 
Joined: Apr 2003
Posts: 7
From: Bear, Delaware
Sometimes you just need to make sure the sides are pushed all the way out... above the windows. Give them a nudge and that may fix the problem.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Sep 14, 2015 02:02 AM
95craz28
Fuel and Ignition
11
Sep 12, 2015 07:47 AM
USN06
New Member Introduction
0
Sep 7, 2015 03:30 PM
GusarskiSS
Exhaust System
1
Sep 2, 2015 03:51 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Aug 5, 2015 08:35 AM




All times are GMT -5. The time now is 04:50 AM.