LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Cometic head Gasket users in here

Thread Tools
 
Search this Thread
 
Old Jul 20, 2003 | 12:26 AM
  #1  
SILVERZZ28's Avatar
Thread Starter
Registered User
 
Joined: Oct 1999
Posts: 448
From: DAPHNE,AL USA
Cometic head Gasket users in here

I am running a set of .067 cometic gaskets on my LT1 car and oil is leaking between the block and heads right were the rivets are at on the gaskets. Anyone have this problem. The only oil passages I can think of is oil drains. I cleaned the entire area completely and drove the car roughly 100miles and its already made its way to the oil pan........


Not Good..
Old Jul 20, 2003 | 10:47 AM
  #2  
SILVERZZ28's Avatar
Thread Starter
Registered User
 
Joined: Oct 1999
Posts: 448
From: DAPHNE,AL USA
TTT
Old Jul 20, 2003 | 10:51 AM
  #3  
Brady's Avatar
Registered User
 
Joined: Dec 1969
Posts: 472
From: Mobile, Alabama
Mine don't do that
Old Jul 20, 2003 | 11:35 AM
  #4  
94 NO TOP Z's Avatar
Registered User
 
Joined: Sep 1999
Posts: 393
From: NASHVILLE, TN
I've seen some dripping off the rear passenger side gasket where it hangs out. I figured it was coming from above some where and dripping down... I haven't found where it is coming from yet.
Old Jul 20, 2003 | 08:01 PM
  #5  
SILVERZZ28's Avatar
Thread Starter
Registered User
 
Joined: Oct 1999
Posts: 448
From: DAPHNE,AL USA
Originally posted by Brady_96Z
Mine don't do that
Brady are you running .067 gaskets?
Old Jul 20, 2003 | 11:37 PM
  #6  
Brady's Avatar
Registered User
 
Joined: Dec 1969
Posts: 472
From: Mobile, Alabama
no, mine aren't nearly that thick. .. that would f*ck up the quench..
Old Jul 21, 2003 | 10:56 AM
  #7  
SILVERZZ28's Avatar
Thread Starter
Registered User
 
Joined: Oct 1999
Posts: 448
From: DAPHNE,AL USA
Hmmm well maybe theres a difference in the gaskets
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
HectorM52
Parts Wanted
2
Jan 10, 2015 09:01 PM
Jazsun
Cars For Sale
0
Dec 29, 2014 12:14 PM
thenewkid
New Member Introduction
5
Nov 27, 2014 09:41 AM




All times are GMT -5. The time now is 07:31 AM.