CamaroZ28.Com Message Board - Cloyes Double Roller

CamaroZ28.Com Message Board (https://www.camaroz28.com/forums/)

- LT1 Based Engine Tech (https://www.camaroz28.com/forums/lt1-based-engine-tech-9/)

- - Cloyes Double Roller (https://www.camaroz28.com/forums/lt1-based-engine-tech-9/cloyes-double-roller-888070/)

DrewHMS97SS

02-04-2020 11:33 PM

Cloyes Double Roller

In a double roller setup, does anything need to happen with the hub? I know an EWP is needed, but what other mods need to be made?

I am looking to convert to the Torquehead setup, and the lack of reluctor being needed got me thinking about the hub and the difference in thickness of the gear and how that would push out the hub.

DrewHMS97SS

02-07-2020 07:03 PM

Re: Cloyes Double Roller

I hear that the actual thickness of the double gear is the same as the single, is this accurate?

bw_hunter

02-11-2020 01:33 PM

Re: Cloyes Double Roller

Quote:

Originally Posted by DrewHMS97SS (Post 7006268)

I hear that the actual thickness of the double gear is the same as the single, is this accurate?

It is. The thickness at the outer diameter where the teeth are is thicker and I had to clearance the timing cover on my '94...

DrewHMS97SS

02-13-2020 10:46 PM

Re: Cloyes Double Roller

Thanks! I had not looked close enough, but the inside of the gear is concave.

https://cimg2.ibsrv.net/gimg/www.cam...f382b5937.jpeg
https://cimg4.ibsrv.net/gimg/www.cam...f3b5cc4a8.jpeg

All times are GMT -5. The time now is 11:27 PM.