CamaroZ28.Com Message Board - Cam requirements

CamaroZ28.Com Message Board (https://www.camaroz28.com/forums/)

- LT1 Based Engine Tech (https://www.camaroz28.com/forums/lt1-based-engine-tech-9/)

- - Cam requirements (https://www.camaroz28.com/forums/lt1-based-engine-tech-9/cam-requirements-886243/)

cristian1311

Dec 24, 2017 10:50 PM

Cam requirements

So after getting with Lloyd I've decided to cam my 93 z28 6speed. What exactly would I need to do this job? I've got the cam, headers, throttle body, push rods, springs, rocker arms, a tune, gaskets, and egr block off. It's 355 by the way. I'll only be home for 20 days and don't have time to wait for parts to come in, so I want to have everything I need. Thank you.

lt1-xjs

Dec 25, 2017 02:53 PM

Re: Cam requirements

After your cam selection you will need a tune. Fill out the custom spec sheet in detail, any questions call Alvin. Mail Order Tuning ? PCM of NC, Inc.

cristian1311

Dec 25, 2017 07:14 PM

Re: Cam requirements

Thank you, that did help. I still have a stock opti on there. Would an after market one be better?

Chimera96

Dec 25, 2017 09:14 PM

Re: Cam requirements

Quote:

Originally Posted by cristian1311 (Post 6996086)

Thank you, that did help. I still have a stock opti on there. Would an after market one be better?

no. a stock (AC Delco) is the one you want. If it needs a new cap & rotor, get the MSD cap & rotor

cristian1311

Dec 26, 2017 06:05 PM

Re: Cam requirements

Thank you. Appreciate it :)

All times are GMT -5. The time now is 06:00 AM.