alright im going to be running a 355 block with full bolt ons, BUT i dont have enough money to have my heads/intake/tb ported.

so ill be running forged internals cept the crank and will be spraying a 175 shot each time.

now what rwhp will i be looking at with that block and a custom grind cam

going to be alot bigger than the 210/224.

So far with the old engine N/A i ran a 12.7 in the dead heat here in houston. So i know im capable of 12.5 in the nice cool weather.

maybe low 12's with the stock topend?

Randy

 

Uhh.....if you ran 12.8 N/A and you're going to be spraying a 175 shot you'll be A LOT faster than low 12s buddy, id expect at least mid 11s. Good thing you got that trans beefed up. Stock 4L60Es DO NOT like big hits of nitrous.

 

i was already mid 11's on gas..

i ran a 12.7 on motor..

im wanting to know what ill run N/A