Re: 94z28 Hypertech Power Programmer III????
 

Like I said, you should measure your existing belt. 635 may be too short. The 642 fits my 95, but might not fit yours. Measure.

Re: 94z28 Hypertech Power Programmer III????
 

ok ill pop it off and how long should it be in inches ? idk what 635 or 642 means :?

Re: 94z28 Hypertech Power Programmer III????
 

Those numbers are the last three digits if the part # .

Re: 94z28 Hypertech Power Programmer III????
 

example:

4 06 049 5

1st digit (4) represents a K section Poly V-belt.

2nd and 3rd digit gives the number of ribs.

4th, 5th, and 6th digit are the length in inches.

7th digit is length in tenth of an inch.

Part number 4060495 would be a K section Poly-V belt, six ribs wide, with a length of 49 and 5/10 inches.

Re: 94z28 Hypertech Power Programmer III????
 

ok ty guys i was also looking at this http://www.ebay.com/itm/JET-19414S-1994-Chevy-Camaro-Firebird-350-LT1-Auto-Performance-Module-Stage-2-/380597922715?hash=item589d676b9b&vxp=mtr
worth money or not that is stage 2 i was looking to stage 1.

Re: 94z28 Hypertech Power Programmer III????
 

I think we are trying to convince you that pre-tuned, "canned" solutions are not what you want and low dollar return. I believe that is even less customize-able than the Hypertech. Your original post said you wanted something custom when done with your mods. Why waste money on something like this, now?

Re: 94z28 Hypertech Power Programmer III????
 

yea i was just trying get info i run across this stuff all day in looking at lt1 stuff. just bored while waiting on my stuff to come in the mail looking threw the internet >:) ebay is full of 25 hp gains with a 20 dollar chip lol.

Re: 94z28 Hypertech Power Programmer III????
 

What they sell on eBay is a total scam. Typically it's a 25-cent resistor in a 50-cent plastic box, with a couple of wires. Patches into the IAT or TPS sensor. It's not a chip and it does absolutely nothing for performance..... Well your car may be faster, because your wallet is lighter after you have been ripped off.

Get a mail order tune now. Most tuners have lower prices for a "basic" tune, and then offer you low cost on future re-tunes.

Re: 94z28 Hypertech Power Programmer III????
 

it is injuneer sad that they are allowed to sell junk like that. my buddy is letting me borrow his Hypertech Power Programmer III what does the power tune do like will i have to run high gas ? im getting to to set fan temps with my 160 thermo im picking up this week. cause when it loads say run stock tunr or a power tune ?

Re: 94z28 Hypertech Power Programmer III????
 

skip to 2.50 whats the tires size that's got me lil confused

Re: 94z28 Hypertech Power Programmer III????
 

You can't "borrow" the Hypertech if it has been used on a car. It only works on one car at a time. If you want to use it on another car, the original car's tune has to be returned to stock.

Clearly, you badly want to try this thing. I suggest you go ahead and then report back what transpires. It has been proven in the past to be pretty worthless (as you have already been advised).

Re: 94z28 Hypertech Power Programmer III????
 

oh yeah im try it mostly for fan setting about it cant hurt if ive got no money in it. and my buddy said was new in box ill ask him i did not know that can only be used 1 car at a time.

Re: 94z28 Hypertech Power Programmer III????
 

how do you upload pics on here id love to show my process of my work i do.

Re: 94z28 Hypertech Power Programmer III????
 

:DThey should re-label it "Hypertech - LT1 Programming for Dummies".

Re: 94z28 Hypertech Power Programmer III????
 

^^^they gotta make a living ok lol