9.60 @ 141.52 @ Bowling Green video is up!!!
Thread Starter
Registered User
Joined: Dec 1998
Posts: 2,407
From: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
9.60 @ 141.52 @ Bowling Green video is up!!!
http://www.bmrfabrication.com/FeatureCars/Tanner.htm
the above link will take you there! too cool!
thanks Brett!
sorry but i wanted to post it here as i know alot of the guys don't always go into the drag race section, i hope that is ok with the moderators!
i almost had the Cartek built LS1, if i could've only treed him, lol!!!
i congratulated the Cartek driver on the win afterwards, and he thought i was just crazee, go figure. what just cause i was rowing the gears
the above link will take you there! too cool!
thanks Brett!
sorry but i wanted to post it here as i know alot of the guys don't always go into the drag race section, i hope that is ok with the moderators!
i almost had the Cartek built LS1, if i could've only treed him, lol!!!
i congratulated the Cartek driver on the win afterwards, and he thought i was just crazee, go figure. what just cause i was rowing the gears
Registered User
Joined: Oct 2002
Posts: 645
From: Modesto, CA
Originally posted by EDS Z28
Damn, that motor sounds healthy!! How do you like the 4.10's around town? Do you have a steel or aluminum flywheel with the Mcleod?
Damn, that motor sounds healthy!! How do you like the 4.10's around town? Do you have a steel or aluminum flywheel with the Mcleod?
awesome ride tho man. Love the color and everything
Thread Starter
Registered User
Joined: Dec 1998
Posts: 2,407
From: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
KeVMaN,
as you saw it that is race mode only! but i gotta say i live to drive the car on the street and even highway, for trips! if i wanted to go faster i would've slapped a th400 in there. it sees more street than track time , all day long
i had the exhaust off, slicks on, and even plastic buckets in the car for those videos. in street trim it gets the seats back, slp2otl, and 17" rims with tires
thanks again everyone.
Derrick,
no wheelie bars needed
Ghettoraid,
hen the car was a bolt on car, headers, y pipe, cai, ignition, and free mods, oh and definitely a gear! car ran 12.76 @ 109.8mph. also see if youcan pull a wee bit of weight out of the car, every little bit helps.
the Cartek LS1 ran a 9.50, that is how i knew i had a good run at the very least
EDS Z28
steel flywheel, need to keep those revs up and i love the 4.10's
FastZinTennessee,
how is mid to low 1.3x's for 60 foots! i consider that to be ok!
as you saw it that is race mode only! but i gotta say i live to drive the car on the street and even highway, for trips! if i wanted to go faster i would've slapped a th400 in there. it sees more street than track time , all day long
i had the exhaust off, slicks on, and even plastic buckets in the car for those videos. in street trim it gets the seats back, slp2otl, and 17" rims with tiresthanks again everyone.
Derrick,
no wheelie bars needed
Ghettoraid,
hen the car was a bolt on car, headers, y pipe, cai, ignition, and free mods, oh and definitely a gear! car ran 12.76 @ 109.8mph. also see if youcan pull a wee bit of weight out of the car, every little bit helps.
the Cartek LS1 ran a 9.50, that is how i knew i had a good run at the very least
EDS Z28
steel flywheel, need to keep those revs up
and i love the 4.10'sFastZinTennessee,
how is mid to low 1.3x's for 60 foots! i consider that to be ok!
