engine miss at idle ... what do you think?
engine miss at idle ... what do you think?
OK, just to keep from typing it all over again, here's the original thread over at West TN F-Body
http://forums.wtfba.org/index.php?bo...y;threadid=902
What do you think?
http://forums.wtfba.org/index.php?bo...y;threadid=902
What do you think?
I swear I have seen that note about 104 Octane Boost before - that came from Install University, right ??
In any case, the simplest solution is usually correct.
I'd guess that you will find the plugs to be the culprit , but it might not be a bad idea to confirm that all the coil packs are working properly.
I guess the best way is w/ an multimeter, as the only other way I know to check for spark is by pulling the plug wires & watching for a spark as the engine is being cranked.
The problem w/ this method is that since you have to get in there in the first place to get to the wires, why not go the rest of the way & pull the plugs for a look-see ?
Best of luck !!
Britt
P.S. I paid $ 100.00 to have mine changed, so you got a better deal - jerk !!
J/K !!
In any case, the simplest solution is usually correct.
I'd guess that you will find the plugs to be the culprit , but it might not be a bad idea to confirm that all the coil packs are working properly.
I guess the best way is w/ an multimeter, as the only other way I know to check for spark is by pulling the plug wires & watching for a spark as the engine is being cranked.
The problem w/ this method is that since you have to get in there in the first place to get to the wires, why not go the rest of the way & pull the plugs for a look-see ?
Best of luck !!
Britt
P.S. I paid $ 100.00 to have mine changed, so you got a better deal - jerk !!
J/K !!
Re: Uggh !!
Originally posted by NEWBIE T/A
I paid $ 100.00 to have mine changed, so you got a better deal - jerk !!
I paid $ 100.00 to have mine changed, so you got a better deal - jerk !!
Thread
Thread Starter
Forum
Replies
Last Post
Sergio
LT1 Based Engine Tech
11
Jan 27, 2016 04:27 PM
Redbird
Drag Racing Technique
3
Sep 14, 2002 09:18 AM



