CamaroZ28.Com Message Board

CamaroZ28.Com Message Board (https://www.camaroz28.com/forums/)
-   General 1967-2002 F-Body Tech (https://www.camaroz28.com/forums/general-1967-2002-f-body-tech-46/)
-   -   Paintless Dent Repair (https://www.camaroz28.com/forums/general-1967-2002-f-body-tech-46/paintless-dent-repair-744446/)

mudbone 03-27-2010 06:00 PM

Paintless Dent Repair
 
Well, Kermit (Mudbone Jr's car) got a spa treatment this week. When we bought the car it had typical F-body dents in the rear quarter panels on both side. Sorry I don't have any before pictures, but they were the usual dollar-coin-sized dents (at least three on each side). Here are some after photos and believe me, you can't see where the dents were.

https://www.camaroz28.com/forums/pic...pictureid=1953
There were two right where the reflection of the Krud Kutter bottle is


https://www.camaroz28.com/forums/pic...pictureid=1952
Two more, were located just between the door jamb and wheel well.


https://www.camaroz28.com/forums/pic...pictureid=1954
This one shows the plug he put in after gaining access for the two above. It's the size of a nickel, and looks like it belongs there.


Total repair cost $200. It was well worth it.

ACE1252 03-27-2010 08:30 PM

I've had some PDR work done on my Nissan truck. It's amazing what they can do.:thumb::thumb::thumb:

Mr. Dull 03-30-2010 11:45 AM

nice pics, thanks. I'd like to see my dents gone like yours

mudbone 03-30-2010 06:38 PM

Sorry I didn't have some "before" shots. I say go for it. These guys are all over the place and the cost seems reasonable. Besides, I'm sure they'd be happy to get the work!

RyanS 03-31-2010 02:31 AM

did they use the picks??? those can be tricky to use but lots of fun watching a dent getting pushed out

6SpdLT1Z 03-31-2010 02:46 AM

I had some PDR done on my old '97 Z28. Really cleaned the car's appearance up.

Before:
http://img81.imageshack.us/img81/5732/crw0602na8.jpg

After:
http://img204.imageshack.us/img204/518/pdraftertk1.jpg

Per https://www.camaroz28.com/forums/sho...d.php?t=512891

mudbone 03-31-2010 06:31 PM


Originally Posted by RyanS (Post 6316057)
did they use the picks??? those can be tricky to use but lots of fun watching a dent getting pushed out

Yes he did, but I didn't get to watch Kermit. He was working on a tailgate of a Dodge Ram when I came back and I got to watch that. It was pretty amazing. The dent was awful, but he had it almost gone while I watched. I had to leave, but I'm sure he fully removed it.


All times are GMT -5. The time now is 01:03 AM.


© 2024 MH Sub I, LLC dba Internet Brands