LS1 and LT1 front brake hardlines the same thing?
Registered User
Joined: Oct 2001
Posts: 6,070
From: newton, kansas, USA
Re: LS1 and LT1 front brake hardlines the same thing?
Are you talking about the Metal line that goes to from master cylinder down to the wheel well? If so they're not exactly the same but should work if you are doing the LS1 brake upgrade if not you may need to bend them to make them work. The LS1 lines end up real close to the LT1 lines and have the same threads as the rubber LT1 and LS1 lines interchange. The only problem might be where they go up to the master cylinder. Actually now that i'm thinking about it they must go from the Master cylinder to the ABS system, then to the wheel. I think they should work.
Thread Starter
Registered User
Joined: Oct 2002
Posts: 2,168
From: AACO, MD
Re: LS1 and LT1 front brake hardlines the same thing?
YEp, the long hardlines...I lost mine during the shuffle. I've got a set out of a 95 V-6, but I need to redo the ends that go up to the MC...might just stick with those, I don't know?
Thread
Thread Starter
Forum
Replies
Last Post
Hurin
Suspension, Chassis, and Brakes
4
Dec 13, 2014 07:38 PM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM
