General 1967-2002 F-Body Tech For general F-Body discussion that does not fit in any other forum.
For F-Body Technical/Information Discussion ONLY

Factory Keyless/ Replacement Remotes

Thread Tools
 
Search this Thread
 
Old Jun 10, 2004 | 08:50 PM
  #1  
CrAkD X 95TA's Avatar
Thread Starter
Registered User
 
Joined: May 2002
Posts: 520
From: Boston, MA
Factory Keyless/ Replacement Remotes

When i got my car i thought it didnt have keyless cause they never gave me a remote or anything but someone pointed out to me that a TA has like every option and i prolly had keyless they just lost the remote. so i looked up the RPO codes and i did have keyless how would i go about getting a replacement remote?


(i posted this in audio/electronics but no one knew so im posting it in here im gonna delete the other one)
Old Jun 10, 2004 | 08:56 PM
  #2  
shoebox's Avatar
Registered User
 
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Just get a remote compatible with your 95 from the dealer or Ebay etc. and do the programming.
Old Jun 10, 2004 | 09:09 PM
  #3  
CrAkD X 95TA's Avatar
Thread Starter
Registered User
 
Joined: May 2002
Posts: 520
From: Boston, MA
Originally posted by shoebox
Just get a remote compatible with your 95 from the dealer or Ebay etc. and do the programming.
thanks alot shoebox...i also posted a problem before but no one looked at it really wondering if you know.....my hazards make the noise when i turn them on but dont blink on the dash or outside the car but the blinkers work by themselves and my radio controls dont light up or anything i was just wondering if these 2 things are connected in anyway? trying to get everything working.
Old Jun 10, 2004 | 09:16 PM
  #4  
CrAkD X 95TA's Avatar
Thread Starter
Registered User
 
Joined: May 2002
Posts: 520
From: Boston, MA
also shoebox do i need a specific fcc id remote? or any 95 pontiac one will work? cause i dont have any remote to get an id from?
Old Jun 10, 2004 | 09:30 PM
  #5  
unvc92camarors's Avatar
Registered User
 
Joined: Jul 2003
Posts: 3,769
From: cinci
Originally posted by shoebox
Just get a remote compatible with your 95 from the dealer or Ebay etc. and do the programming.
i went to the dealer today because i want to get rid of the aftermarket alarm and apparently, the keyless has been discontinued or something
so i'm guessing ebay and junkyard are where you should look
i know i will be
Old Jun 10, 2004 | 09:33 PM
  #6  
CrAkD X 95TA's Avatar
Thread Starter
Registered User
 
Joined: May 2002
Posts: 520
From: Boston, MA
good thing i snatched up the remote lol theres still a chevy remote on there tho.
Old Jun 10, 2004 | 09:33 PM
  #7  
unvc92camarors's Avatar
Registered User
 
Joined: Jul 2003
Posts: 3,769
From: cinci
Originally posted by CrAkD X 95TA
also shoebox do i need a specific fcc id remote? or any 95 pontiac one will work? cause i dont have any remote to get an id from?
yea shoebox, i'm wondering this too
do i gotta get a 95 or will any work
i assume any from 93-00 (dealer said they changed it somehow in 2001) will work
but i still dont know for sure
Old Jun 10, 2004 | 09:35 PM
  #8  
CrAkD X 95TA's Avatar
Thread Starter
Registered User
 
Joined: May 2002
Posts: 520
From: Boston, MA
no i think they changed em in 96 after reading brents alarm install guide...so safe bet is get one from 93-95
Old Jun 10, 2004 | 10:23 PM
  #9  
unvc92camarors's Avatar
Registered User
 
Joined: Jul 2003
Posts: 3,769
From: cinci
yea, they added the alarm in for 96
they also changed the fobs a little
but i think they made like a computer change or something 2001 so 01-02 are definately not compatible where as 93-02 should theoretically work, even though they don't look the same
Old Jun 11, 2004 | 06:58 AM
  #10  
moparman's Avatar
Registered User
 
Joined: Nov 1998
Posts: 2,761
From: Louisville, KY
Autozone has recently started carrying oem and aftermarket keyfobs. Check with them. You'll need your vin code.
Old Jun 11, 2004 | 09:23 AM
  #11  
CrAkD X 95TA's Avatar
Thread Starter
Registered User
 
Joined: May 2002
Posts: 520
From: Boston, MA
AUO Lock Control, Remote Entry
AUD remote keyless entry

whats the difference between these 2 codes? cause i have the AUO and i didnt see that there was an AUD til now.....i just assumed the AUO was keyless entry if not i just ordered a useless remote.....unless there is a way to make my car keyless?
Old Jun 11, 2004 | 09:49 AM
  #12  
shoebox's Avatar
Registered User
 
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Originally posted by CrAkD X 95TA
AUO Lock Control, Remote Entry
AUD remote keyless entry

whats the difference between these 2 codes? cause i have the AUO and i didnt see that there was an AUD til now.....i just assumed the AUO was keyless entry if not i just ordered a useless remote.....unless there is a way to make my car keyless?
No such thing as AUD. You are mistaking the 0 for D. I have never referenced them by FCC ID. Stick with the pre 1996 remote. People get them of ebay all the time. There are also some other online vendors that have them. Google it.
Old Jun 11, 2004 | 01:55 PM
  #13  
CrAkD X 95TA's Avatar
Thread Starter
Registered User
 
Joined: May 2002
Posts: 520
From: Boston, MA
Originally posted by shoebox
No such thing as AUD. You are mistaking the 0 for D. I have never referenced them by FCC ID. Stick with the pre 1996 remote. People get them of ebay all the time. There are also some other online vendors that have them. Google it.
ahh ok i got the AUD off a site thats why it says AU0 in my glovebox.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stangspank
Car Audio and Electronics
3
Nov 13, 2015 01:02 PM
dale3in98
Cars For Sale
0
Feb 14, 2015 12:18 PM
Rod Bender
General 1967-2002 F-Body Tech
0
Jan 3, 2015 03:15 PM
Jeff1904
General 1967-2002 F-Body Tech
0
Jan 3, 2015 12:00 AM
icemonkey
Car Audio and Electronics
1
Feb 5, 2003 03:53 AM




All times are GMT -5. The time now is 09:09 AM.