Chevy Hi Performance: Cams (May issue)
#1
Chevy Hi Performance: Cams (May issue)
For those who are like me and researching on cams the May issue of Chevy Hi Performance is a must. The issue has 3 articles on cams.
Dyno Test: Lobe Separation Angle Secrets
How to Choose the Right Cam
Cams for Computer Cars
Cam Basics
Also Bulletproof Six-Speed Tricks
Dyno Test: Lobe Separation Angle Secrets
How to Choose the Right Cam
Cams for Computer Cars
Cam Basics
Also Bulletproof Six-Speed Tricks
#3
I did see that issue, but to be honest I don't really know too much about choosing a cam for a basically stock a4 ls1... I was wondering if anyone can reccomend a good cam and describe setup that they have bought for an LS1.
#4
Re: Chevy Hi Performance: Cams (May issue)
Originally posted by therealmagyver
For those who are like me and researching on cams the May issue of Chevy Hi Performance is a must. The issue has 3 articles on cams.
Dyno Test: Lobe Separation Angle Secrets
How to Choose the Right Cam
Cams for Computer Cars
Cam Basics
Also Bulletproof Six-Speed Tricks
For those who are like me and researching on cams the May issue of Chevy Hi Performance is a must. The issue has 3 articles on cams.
Dyno Test: Lobe Separation Angle Secrets
How to Choose the Right Cam
Cams for Computer Cars
Cam Basics
Also Bulletproof Six-Speed Tricks
any of these articles online?
#6
Originally posted by GetaZforgetGT
Same issue has an article on making the 10 bolt stronger.
Moser has some input for the article.
Same issue has an article on making the 10 bolt stronger.
Moser has some input for the article.
I really dont think a 10 bolt can take 400hp behind a six speed.
#8
Originally posted by FlyBono24
Good issue...
I've been thinking of getting the LT4 hotcam kit... but the kit only includes like the rocker arms, springs, and valve pieces.... do I just use the existing lifters and valves?
Good issue...
I've been thinking of getting the LT4 hotcam kit... but the kit only includes like the rocker arms, springs, and valve pieces.... do I just use the existing lifters and valves?
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
CARiD
Supporting Vendor Group Purchases and Sales
0
01-14-2015 04:00 AM
formula79
Automotive News / Industry / Future Vehicle Discussion
18
07-01-2002 02:39 PM