Well I have decided to go another route. This is a vortech kit that I bought used off a board member with 12k miles, but is missing some things. I never installed the kit.

Here is what it has:

Vortech S Trim (6-7psi pulleys) Satin
Brackets
Oil lines, but doesnt have the fittings for the oil pan
FMU (8:1?)
MSD timing retard box (wires are all cut, no connectors)
All tubing except for hard vortech elbow that bolts to throttle body
Air filter (a little beat up, but useable)

It is missing:

dryer ducting piece
vortech elbow
oil fitting for the pan
fuel pump
some nuts/bolts.

It does have a parts manual (which can be downloaded anyway online). These parts shouldnt be more than $250-300 if you look around.

I would like $1600 shipped anywhere in the continetal US. For an additional price of $150 I will throw in ASP 6.66 and ASP 2.75 Pullies (should make ~14-15psi). For an additional $200 I will throw in an Accel 300+ box and coil (for 94-95 LT1) and an Accel 375+ timing retard.

Base kit: $1600
kit + ASP Pullies: $1750
kit + Ignition: $1800
kit + ignition + pullies: $1950

please email me:

jrbellas95z28@yahoo.com