DrewHMS97SS

I've seen a ton of the Dominator stuff on RKG and HRG. Are you going to let it self tune first, then do the tune, or straight to the tune?

Injuneer

This thread make me wish I was 30 years younger so I could start a project like this. Appears so well thought out and carefully executed.

Steve69SS396

Let it self tune for the initial start. I'll let the tuner decide for the dyno pulls. I've always tuned carbs. This is my first time with EFI.

Thanks. Next winter it will get a new chassis. Full back half in the rear and a strut front end. The following year will be body and paint. I plan on retiring in 2 years and I want the car finished.

Steve69SS396

Some progress this weekend. Procharger sent me the wrong accessory drive when I ordered in in early January. The correct one arrived on Friday.

DrewHMS97SS

Looking good. Noob question: what are the studs in the lifter valley?

Steve69SS396

Those are just vents into the crankcase. Oil goes down the other holes.

Thanks!

Steve69SS396

Not running yet, but getting closer. Had to change some things.

DrewHMS97SS

I like the coil pack mounts on the valve covers; super clean! The accessory brackets are really nice too. I need a first gen, I am overly jealous about all the room you have under the hood.

Steve69SS396

My son's 461 LSX is finally finished. It made 758HP and 665tq on 91 octane pump gas, no nitrous.

Steve69SS396

My engine is getting closer. It's supposed to be finished this week.

Steve69SS396

The car will be finished today and dyno tuned on Sunday.

DrewHMS97SS

Rock on!

Steve69SS396

It runs! Still needs to be tuned, the idle is too low.

DrewHMS97SS

Grats, it sounds great! Have you gotten the tune and dyno yet?

Injuneer

Ahhhhh..... life is good!