I'm looking at some 55# injectors,and was wondering if that is to big of an injector for my need?

This is what I have (which is finally coming together!!!)

355 forged eagle/SRP bottom end
Custom BRE cam
Lightly ported heads
Pacesetter LT headers
T56/3.73 gears
Walbro 255 LPH
(Plan on getting a N2O wet kit and spray a 50 shot)


I also have the in-line pump from procharger would this and there FMU be needed?

If the 55's are to big which size would I need for my setup....?

Thanks in Advance for your help,


P.S. any 1/4 mile time estimates with my setup?

 

first of all theres never such thing as too big of injector, as long as they are the right thing for the pcm , high impidience you can tune with a big injector no problem, and if you want to step up later on, all you have to do is add fuel through a tune.
50 shot on a forged buttom end? wow, i would at least spray 150. A decent head cam set up should be in the 11s with a right tire and driver, how deep in the 11s? it all depends on who tunes the car and your combination. you wont even feel a 50 shot though so good luck with that

 

Is there a Blower in this combo?

 

Yea it's a P600B

 

Any other's feel free to chime in...