Too cold for the 4L60E?
Thread Starter
Registered User
Joined: Aug 2003
Posts: 643
From: Chicago
Too cold for the 4L60E?
Tranny Temp Gauge (4L60E)
ok got it in...
took her out for like 25 minutes and got it shifting gears alot and it took forever to get to 150 then will not get hotter than 150 degrees? i have a B&M 24K tranny cooler (hooked to the stock cooler) and the fans are programed to come on at 180...is 150 too low? i mean it will maybe go to 155...maybe...but no hotter...im glad my tranny doesnt run hot but 150...is that too low?
think its giving accurate readings? I would think if anything it would read hotter b/c of the location of the sender (heatsoak..port on upper drivers side) its a good gauge/sender...Lunar 70$
whadayathink
too much cooling?
ok got it in...
took her out for like 25 minutes and got it shifting gears alot and it took forever to get to 150 then will not get hotter than 150 degrees? i have a B&M 24K tranny cooler (hooked to the stock cooler) and the fans are programed to come on at 180...is 150 too low? i mean it will maybe go to 155...maybe...but no hotter...im glad my tranny doesnt run hot but 150...is that too low?
think its giving accurate readings? I would think if anything it would read hotter b/c of the location of the sender (heatsoak..port on upper drivers side) its a good gauge/sender...Lunar 70$
whadayathink
too much cooling?
Thread
Thread Starter
Forum
Replies
Last Post
WobblySausage
LT1 Based Engine Tech
6
Oct 7, 2015 02:44 PM
WobblySausage
Drivetrain
4
Oct 7, 2015 10:09 AM