Fuddle
#1
Fuddle
Anyone have any experience with them? I'm looking into ordering a 3600 stall from them. I recall them being a very reputable brand and their prices seem pretty killer.
Also, I read the stickies on converters. But I still don't fully understand the lockup function of a stall. I know that if it locks up, the ratio is 1:1 and no torque is mulitiplied. On my stock stall, I know it locks up at 50 mph in 4th gear. When would it ever be suitable for it to lock up at WOT? Why would you want it to not mulitiply torque? I could only see this suitable at highway cruising speeds. How would I program the PCM on my 93 to lockup? Would I just get it programmed to lock up at the same conditions as stock (ie at 50 mph in OD)?
Thanks for the help
Also, I read the stickies on converters. But I still don't fully understand the lockup function of a stall. I know that if it locks up, the ratio is 1:1 and no torque is mulitiplied. On my stock stall, I know it locks up at 50 mph in 4th gear. When would it ever be suitable for it to lock up at WOT? Why would you want it to not mulitiply torque? I could only see this suitable at highway cruising speeds. How would I program the PCM on my 93 to lockup? Would I just get it programmed to lock up at the same conditions as stock (ie at 50 mph in OD)?
Thanks for the help
#2
The lockup is for gas mileage. You never want it to lock up at WOT.
Also, i had my fuddle for a month or so until my tranny blew. It was AWESOME from a 30 roll. It threw me in my seat harder than any car I've ever driven. My performabuilt feels more like a stock converter until I really get on it. Don't know which I like better.
Also, i had my fuddle for a month or so until my tranny blew. It was AWESOME from a 30 roll. It threw me in my seat harder than any car I've ever driven. My performabuilt feels more like a stock converter until I really get on it. Don't know which I like better.
#4
I read a little on LS1tech and saw they have some negative customer service reviews... anyone else want to comment on this? I'm mainly looking for information like reliability, quality, performance, etc.
Thanks
Thanks
#5
http://ls1tech.com/forums/showthread...onverters+edge
Not stalking you I just have no life today. I've pretty much been there and done that with all your LT1/performance questions. Check out your fast thread under technical discussions.
Thread
Thread Starter
Forum
Replies
Last Post
1jfuddle
Supporting Vendor Group Purchases and Sales
0
03-16-2007 12:22 PM
1jfuddle
Supporting Vendor Group Purchases and Sales
1
12-26-2006 04:43 PM
1jfuddle
Supporting Vendor Group Purchases and Sales
4
01-25-2006 05:17 PM