12 Bolt Install
I am doing a Moser 12 bolt install.
I have the calipers removed from their brackets. According, to the directions I have read, I am supposed to be able to remove the rotors and the caliper bracket. I have tried to loosen the four bolts that hold the caliper bracket in place but both the nut and bolt turn. How do you remove the rotor from a 99?

 

I just did a moser 12 bolt on a 1997. I thought the cal-bracket was the same on later models. Just four bolts on the old, I think a 3/8 of 15mm socket. The bolt hole on the bracket in counter sunk. After you pull the C_clip axels, you can get @ them. Besure to mark LH and RH to reinstall. They assemble on the Moser axle, and, it is a press fit if you go with NON-c_clip type. Had to purchase a new drive shaft. 1350 yoke, so, I went with a denny HD. Waiting for it now.