List of fastest LT1's (thru November 2021)
#167
Re: List of fastest LT1's
Originally Posted by tubby
**UPDATE**
Ric Fleck (TUBBY)
FLEX RAcing
went 9.20 @ 145.9 sat. night 2/26 at SVT day jackson SC
60' was 1.27
procharged/NOS 1997 t/a
Ric Fleck (TUBBY)
FLEX RAcing
went 9.20 @ 145.9 sat. night 2/26 at SVT day jackson SC
60' was 1.27
procharged/NOS 1997 t/a
#168
Re: List of fastest LT1's
CAM/ HEAD Lt1....figured I'd add James Eddy since he dont post here much..
ported factory lt1 castings and hyd. roller stock bottom end
1.49 60 ft.
7.01@99mph
11.05@120.1
race weight est. around 3500lbs
ported factory lt1 castings and hyd. roller stock bottom end
1.49 60 ft.
7.01@99mph
11.05@120.1
race weight est. around 3500lbs
#169
Re: List of fastest LT1's
You can slide me in at #31
10.02 @ 135.71 w/ 1.47 60 ft
383 D-1 19#
Timeslip
http://www.tta89.net/marc/10-02run.jpg
Video
http://www.tta89.net/marc/10zerorun.mpg
Marc Rahn
10.02 @ 135.71 w/ 1.47 60 ft
383 D-1 19#
Timeslip
http://www.tta89.net/marc/10-02run.jpg
Video
http://www.tta89.net/marc/10zerorun.mpg
Marc Rahn
Last edited by 1st and goal; 03-01-2005 at 07:44 AM.
#170
Re: List of fastest LT1's
Originally Posted by 1st and goal
You can slide me in at #31
10.02 @ 135.71 w/ 1.47 60 ft
383 D-1 19#
Timeslip
http://www.tta89.net/marc/10-02run.jpg
Video
http://www.tta89.net/marc/10zerorun.mpg
Marc Rahn
10.02 @ 135.71 w/ 1.47 60 ft
383 D-1 19#
Timeslip
http://www.tta89.net/marc/10-02run.jpg
Video
http://www.tta89.net/marc/10zerorun.mpg
Marc Rahn
Im going to reorganize the list this weekend and seperate it into two lists, Power Adders and Naturally Aspirated. Feel more than welcome to post up your times, I'll add them this weekend.
Last edited by meengreen 94z; 03-01-2005 at 07:47 PM.
#171
Re: List of fastest LT1's
Originally Posted by Joes94TA
CAM/ HEAD Lt1....figured I'd add James Eddy since he dont post here much..
ported factory lt1 castings and hyd. roller stock bottom end
1.49 60 ft.
7.01@99mph
11.05@120.1
race weight est. around 3500lbs
ported factory lt1 castings and hyd. roller stock bottom end
1.49 60 ft.
7.01@99mph
11.05@120.1
race weight est. around 3500lbs
#172
Registered User
Join Date: Oct 2000
Location: Albuquerque,NM--5,600 feet above you sea-level cats
Posts: 440
Re: List of fastest LT1's
I race at 5,300 elevation. I guess my ? is do corrected times count. Up here this past weekend I went 11.33@122mph on a 1.58 60'. DA was 6,000'. Corrected for Sea Level was 10.41@131mph. All Motor 6 speed car.
398cid
Solid Roller
AFR 210's
Currie 9" with 4.56's
Weight should be 3,400 pound(that's a guess)
Car made SAE 500.4rwhp & 457.1rwtq, uncorrected here made 413rwhp & 376rwtq.
If you don't use corrected times that's cool. I'm just stuck at a mile high that's all.
Neal
398cid
Solid Roller
AFR 210's
Currie 9" with 4.56's
Weight should be 3,400 pound(that's a guess)
Car made SAE 500.4rwhp & 457.1rwtq, uncorrected here made 413rwhp & 376rwtq.
If you don't use corrected times that's cool. I'm just stuck at a mile high that's all.
Neal
#174
Re: List of fastest LT1's
Originally Posted by Joes94TA
CAM/ HEAD Lt1....figured I'd add James Eddy since he dont post here much..
ported factory lt1 castings and hyd. roller stock bottom end
1.49 60 ft.
7.01@99mph
11.05@120.1
race weight est. around 3500lbs
ported factory lt1 castings and hyd. roller stock bottom end
1.49 60 ft.
7.01@99mph
11.05@120.1
race weight est. around 3500lbs
Steve... slow LT1 guy
#175
Re: List of fastest LT1's
Originally Posted by SAR2K
Damn you Joe & your LT1 magic, LOL!!! Can I assume Eric had something to do with those heads??? You better cut this crap out!!! You'll scare the LS1 guys off!!!
Steve... slow LT1 guy
Steve... slow LT1 guy
Steve lol yeah Eric did them out in his tinshed ...as far as the ls1'ers they havnt seen scared yet.. even though I been working on a few of those as well...
#177
Re: List of fastest LT1's
Please update..set a new best tonight. 10.77 @ 127.65 on a crappy clutch slipping 1.509 355 6 speed with ported factory lt4s.(No AFRs here )
Time for a new clutch. I want my low 1.4 60's back
Time for a new clutch. I want my low 1.4 60's back
#178
Re: List of fastest LT1's
My current best was 10.30 @ 135..this was with a 2.25 60'
on a 300 shot..sideways off the line and sideways in 2nd..no lifting though!
was it fear or anger..?..LOL..
355 ci..4L60E.. stock pcm 4.11 gears
Matt
on a 300 shot..sideways off the line and sideways in 2nd..no lifting though!
was it fear or anger..?..LOL..
355 ci..4L60E.. stock pcm 4.11 gears
Matt
Last edited by MattSLONOMO; 03-13-2005 at 03:50 PM.
#180
Re: List of fastest LT1's
Too bad Mike Moran's motor isnt an LT1. He did very well at the Rock the other week too. 6.29 at 201 I believe. I'm thinking about giving him my LT1 and see what he could do with a little power adder...but then again that takes all the fun out of building your own motor!