I'm going to get one, but want some input on what one to buy.

Randy

 

I have the wolfe antiroll bar and love it. The car goes straight as an arrow down the track and feels very stable.

Matt

 

I have the anti-roll bar from Billingsley Racing. He has pulled 1.26's using this bar on his car so i figure it must work pretty good
I sent my housing to him and had it welded on and like the way it all came out.
Housing with anti roll bar

Another shot of rear before the Billingsley panhard rod and lower control arms went in

Jay is a really good guy to deal with and prices are not that bad. Plus the suspension works. (not that the wolfe doesn't)
Steven

 

I'm using the stock rear sway bar on mine. With the Southside Machine lower control arms. With a bit of air bag tuning it goes very straight and does not twist when I launch.

 

I have the BMR anti roll bar and love it. It is awesome at the track and is very streetable.

 

Wolfe Racecraft... Enough said


Keith

 

Thanks for all the input guys! I decided to go with the BMR bar and got it on today and just got back from the local 1/8 track. First pass was 1.575 60ft 7.53@90.18. Four hundrenths better than my previous best 1/8 time. Second pass, 1.570 60ft 7.51@90.11 mph. Two more hundrenths improvement and the car is as straight and level as anything I could ask for, and it was all done on a TnT night and everybody knows how poor the track prep is on a TnT night. Again, thanks for everybodys input, I just wish I had done this sooner.

Randy

 

No mark I sure don't. Man I've had more new best in the last 2 weeks than in my whole life. Now drop some more weight and add a little (alot) of n2o and who knows. Later.

Randy