welp i'v justy started putting everything back together on my 76 350 it's got stock stroke & bore as well as a stock cam.. for a 76 casting.. stock pistons with 1979-85 "350 CID" Intake=1.94 Exhaust=1.5 66cc heads.. and i wanted to know what headers and intake i could use in it.. also what cam would be good for it, without needing new valves, springs, etc..?
~J

 

As far as the headers I would go with some good cheap hedman 1 5/8s they will help provide good low end torque. A edelbrock dual plane intake will also help your setup as well

 

any particular model of edlebrock? performer? performer rpm? Air Gap?? anyone have any advice for a cam kit for it?
~J