Want V8 M6 project
08-24-2009, 06:01 AM
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: Oklahoma
Posts: 580
Want V8 M6 project
Not being as picky this time around. Want Camaro or Firebird project. Doesnt need to run, but I do want one with the 6 speed still in it or with it at least. LT1 car or LS1 car. Really want a 98-02 T/A or Formula, but dont have a truck load of cash to work with for purchase. my 9 month old kinda puts a limit on that lmao.
Must have a title that is ready to transfer, must be straight(no frame machine time), dont mind some damage or bolt on part damage. I have 2 cars I can use for parts, mostly Camaro stuff... so interior is not a big issue for either car. Doesnt have to have engine, but would prefer something to work with. Not a deal breaker though. I do have a lot of LS1 stuff, just no block/rotating assembly.
Must be fairly close to 74437 Oklahoma or seller willing to help with delivery as I dont have anything to haul with and have limited help on distance with family hauling for me.
Please post pictures, location, price, and good description. I cant afford one thats running and driving, ready to go, so please dont reply with a $5000 car.
Must have a title that is ready to transfer, must be straight(no frame machine time), dont mind some damage or bolt on part damage. I have 2 cars I can use for parts, mostly Camaro stuff... so interior is not a big issue for either car. Doesnt have to have engine, but would prefer something to work with. Not a deal breaker though. I do have a lot of LS1 stuff, just no block/rotating assembly.
Must be fairly close to 74437 Oklahoma or seller willing to help with delivery as I dont have anything to haul with and have limited help on distance with family hauling for me.
Please post pictures, location, price, and good description. I cant afford one thats running and driving, ready to go, so please dont reply with a $5000 car.
10-26-2009, 07:40 AM
#3
Registered User
Thread Starter
Join Date: Nov 2006
Location: Oklahoma
Posts: 580
still looking. have some stuff to trade including a 98 B4C shell for a race project, title is f'd kid I got it from signed it but never transferred it and have not been able to find him since. will give more details if anyones interested.
V6 car will also be coming apart when I find the right project. so motor/trans etc will be up for trade/sell.
V6 car will also be coming apart when I find the right project. so motor/trans etc will be up for trade/sell.
11-02-2009, 01:49 PM
#4
Registered User
Join Date: May 2006
Location: Kansas City
Posts: 280
i have a 95 dark polo green metallic roller. it has 123k on the body but is really clean for its age. the car is already setup to be more for the track. it has the hvac totally deleted, stand up griffen radiator with spal fans. i also have a harwood hood with it. and a 10 bolt with welded axle tubes, t/a cover, and motive 4.11 gears with about 20 miles on them. totally stock suspension and ls1 k-member (all i could find). i can figure out something for delivery for a fee. but im asking 1500 for everything. any questions just call me 913 633 0218. or send an email to kylersaulsbury@yahoo.com since im not on here much those are the best ways to contact me.
11-14-2009, 01:10 PM
#6
Registered User
Join Date: May 2006
Location: Kansas City
Posts: 280
not not at that price. the tranny is built and im asking 1000 for it, but the hydraulics are there. and im still up in the air on what to do with the wheels. if i do sell the wheels with it i'd ask 600. but i do have a clean title in hand with no liens.
01-02-2010, 03:42 PM
#8
Registered User
Join Date: May 2000
Location: Colorado Springs, Co
Posts: 74
I have a 94 m6 1LE in Colorado.
This was my project car, but other interests have taken over, so I am cleaning it out plus a ton of other parts and stuff.
If you buy the car I can let you pick through the other parts you would like and give you a super good deal.
You can drive this car across country (without snow LOL) but it is probably less than 6rs to most places in Ok from here.
Let me know if you are interested.
This was my project car, but other interests have taken over, so I am cleaning it out plus a ton of other parts and stuff.
If you buy the car I can let you pick through the other parts you would like and give you a super good deal.
You can drive this car across country (without snow LOL) but it is probably less than 6rs to most places in Ok from here.
Let me know if you are interested.
01-05-2010, 05:55 AM
#9
Registered User
Thread Starter
Join Date: Nov 2006
Location: Oklahoma
Posts: 580
94red, whats a starting price? Sounds like it might be a little more $$$ than I have to spend at the moment still, like the last offer in the thread. However, tax time is coming up quickly also. I may be able to spend a bit more than I had originally planned on, but not sure how much yet. So a starting price, cheapest your wanting to go for just the car, to price with parts, pictures of the car/parts in question, etc. It would be nice to be able to just drive one home, then I could just park the V6 I have and start pullin the goodies off and sellin parts off it. It runs like a top, just the rest of the car is fallin apart and beat pretty badly. It also has title issues since the place I bought it from went out of business before I got a lein release 
so no big block swap like I wanted to do. anyway, interested, just gotta know a starting point.
If you want you can just pm me prices.
so no big block swap like I wanted to do. anyway, interested, just gotta know a starting point.If you want you can just pm me prices.
