Recently installed the system listed in sig and after standing outside the car I found the rear bumper, deck lid, and license plate rattling like crazy. So today I bought some Xtreme Dynamat and matted the license plate with the dynamat plate kit, and lined the inner rear trunk with the matting, and the rear bumper and license plate rattles seem to be eliminated. I put a little bit of matting in the rear decklined, but it still rattles a little, any advice on where specifically i should put the dynamat in the deck lid.

THanks for the help

------------------
Chris 96 Z28 A4(3.42) SLP CAI,20DL,BMR STB,LCA,PHR, 1LE sway bars, KBDDSFC,Bilstein Shocks, Eibach Pro-Kit, MSD 6A, Moroso Blue Max wires, NGK TR55, Chrome SS rims, 275/40/17 BFG G-Force T/A KDW, HPP+.

Car Audio: Panasonic cqdf402u head unit, Infinity Reference 6.5" (2), Concept Amplifiers 504a and 800 sub amp, 2 12" Infinity Kappa Perfect subs

 

Someone must have some experience with this. Or at least some ideas.

Thanks

 

TTT

 

Head over to www.fbodyaudio.com and look up DJ Sexay on the forums there. He has matted probably every crevise of his Hawk and should be able to give you some pointers.

 

Good choice on the Dynamat Xtreme. I like the tar, it sticks much better than Road Kill.

Remove the hook on the top of your trunk lid and apply some underneath there. I also applied some to the rod on the lock for the trunk. Remove your taillights and apply some to any places that you see the taillights have been rubbing. There is also the heat shield underneath the car(the one that covers the muffler) that might be rattling.

hope this helps