Cam Opinions
#61
Re: Cam Opinions
Originally Posted by 91Z-28
www.tristatecylinderhead.com/trithunder.htm
These are the heads I'm probably going to get, they sent me these flow #s:
Intake Valve Test @ 28” of Water
.100 .200 .300 .400 .500 .600 .700
69 144 201 249 259 266 274
Exhaust Valve Test @ 28” of Water
.100 .200 .300 .400 .500 .600 .700
52 99 157 174 183 189 193
Along with that cam I mentioned earlier, I am considering the CC306 and GM 846 as well. I'm just looking to get as close to 400 to the wheels without cam surge or vacuum loss.
These are the heads I'm probably going to get, they sent me these flow #s:
Intake Valve Test @ 28” of Water
.100 .200 .300 .400 .500 .600 .700
69 144 201 249 259 266 274
Exhaust Valve Test @ 28” of Water
.100 .200 .300 .400 .500 .600 .700
52 99 157 174 183 189 193
Along with that cam I mentioned earlier, I am considering the CC306 and GM 846 as well. I'm just looking to get as close to 400 to the wheels without cam surge or vacuum loss.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM