texas97z

Wondering what my rotating assembly and cam/springs would be worth as it will be coming out soon. SCAT 9000 383 crank / 5.7 SCAT I beams/ Forged 2 valve relief pistons( 58cc heads = 11:1, 54cc = 12.5:1) Cam is regrind GM847 on a small base circle, with matching springs for use with 1.6ratio rocker arms. Cam only has 4k on it, springs have just a few hours of run time. Bottom end has about 30k on it. Car is still together and running if someone local wants to make serious offer They can hear everything before I take apart.

The bad is (and reason for only few hours on new valve springs) there is a bottom end knock. More than likely rod bearing from the way it sounds. So crank will need to be turned. I can get this done for $50 if you do not have someone but I am selling this as is. I will be going much less street on everything when I tear into this again so money will go towards that build. So if I don't get a decent offer (not expecting to get rich but reasonable) I will just keep it all. I would be interested in trading for a good set of drag wheels with MT drag radials if good enough trade.

Serious offers can PM me with offer and we can exchange phone #'s to work it out. Thanks.