Has anyone used 2 V6 f body over axle exhaust pipes for duals?
02-27-2017, 11:45 PM
#1
Registered User
Thread Starter
Join Date: May 2001
Location: fort worth/burleson Tx
Posts: 1,513
Has anyone used 2 V6 f body over axle exhaust pipes for duals?
I was trying to think of the best way to get my dual exhaust ran out the back to tone down my sound and possibly swap mufflers. Has anyone taken two of the stock v6 bends over the axle and used them for this? I think they are 2.25 which I think would be sufficient for my power level. Was thinking out the back with something quiet and e cut outs off the header for that Satan riding a horse across a field to harvest souls sound.
03-05-2017, 12:04 AM
#3
Administrator
Join Date: Nov 1998
Location: Hell was full so they sent me to NJ
Posts: 70,646
Re: Has anyone used 2 V6 f body over axle exhaust pipes for duals?
Posts 12 an 15 in this thread show dual pipes going over the passenger side of the axle.
https://www.camaroz28.com/forums/exh...p-here-598251/
Or do you want to take one pipe over the driver's side, and the other over the passenger side?
https://www.camaroz28.com/forums/exh...p-here-598251/
Or do you want to take one pipe over the driver's side, and the other over the passenger side?
03-07-2017, 12:43 AM
#4
Registered User
Thread Starter
Join Date: May 2001
Location: fort worth/burleson Tx
Posts: 1,513
Re: Has anyone used 2 V6 f body over axle exhaust pipes for duals?
post 15 is about what I was thinking, I guess I was wondering if there were any foreseeable issues with using 2 of the stock over axle bends from v6 f bodies.