BMR STB Question
Registered User
Joined: Dec 1999
Posts: 357
From: Reynoldsburg, Ohio
1) You should pay between $50-70 for a used one if it's steel with powdercoating(not the chromoly one).
2) They tie the front end of the car's unibody construction together to prevent body flex from turning and decent amounts of power.
Good, cheap mod. You'll feel a small difference in handling
2) They tie the front end of the car's unibody construction together to prevent body flex from turning and decent amounts of power.
Good, cheap mod. You'll feel a small difference in handling
Last edited by Bone Maro; Feb 17, 2003 at 01:46 AM.
Registered User
Joined: May 2001
Posts: 1,122
From: Memphis, TN, USA
I don't know what the used market price is for BMR since I bought mine from Spectacle Solutions (www.spectaclesolutions.com)
$60 - brand spankin' new in your choice of powdercoated colors.
Brian even did a custom one the other day. He did it in Sunset Orange Metallic to match a guy's SOM Camaro SS.
Why buy used when you can get a new one with a warranty? Also, your next mod should be SFC's. That's what really tightens up the ride and makes the car corner like it's on rails.
$60 - brand spankin' new in your choice of powdercoated colors.
Brian even did a custom one the other day. He did it in Sunset Orange Metallic to match a guy's SOM Camaro SS.
Why buy used when you can get a new one with a warranty? Also, your next mod should be SFC's. That's what really tightens up the ride and makes the car corner like it's on rails.
Last edited by rncotton; Feb 17, 2003 at 02:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jim88iroc305
Car Audio and Electronics
1
Aug 13, 2002 09:24 PM
Skull Leader
Car Audio and Electronics
12
Aug 10, 2002 11:01 AM