Currently trying to make sure I have all the hardware for my T56 swap. I need the bolt size for the trans to bellhousing. Also for the bellhousing to the block because I will need 2 more correct?

FYI- I did try and use the search but couldn't find anything.

 

They are M10x1.5x40. You need 8 of them. You don't need extra bolts for the bellhousing to block. It reuses the same 6 bolts as the auto.

 

1.5 seems a little short? no?

 

1.5 (mm) is the distance between threads. Yeah, it is supposed to be a little short.

40 mm is the length.

 

Is this the correct bolt size for the trans to bellhousing ?

 

Yes, I already posted the correct size.