1998 500 HP Camaro Z28 For Sale
I'm selling my torch red 1998 Camaro Z28.
The car is a hardtop with 45,000 miles has tilt wheel, cruise control, power windows/locks AC, traction control and is a 6 speed.
The car put down 432 RWHP (500 FWHP) and 393 RWTQ.
The car ran 12.1 @ 118.60 MPH on street tires and will run 11's on slicks.
The car can be seen at www.z28pwr.com .
Currently the car sits on 98 C5 Corvette wheels but if you'd like I can swap them with some 00 SS wheels.
I've spent over 13K in just mods for this car.
The car has the following modifications:
MTI Stage II Heads
MTI T1 Cam
Z06 Intake
LS1 Motorsports Intake Lid
GMS MAF
Mac Headers
MTI Power Pulley
Whisper Ram Air
Pro 5.0 Shifter
Hurst Line Lock
Moser 12 Bolt With 3.73 Gears
HyperTech Power Programmer
MAF Translator
PowerSlot Rotors
Star Clutch Stage III Clutch (Brand New)
Mcleod Adjustable Master (Brand New)
Aftermarket Slave (Brand New)
and of course a K & N air filter
The transmission was rebuilt 800 miles ago and a new clutch, mcleod master and slave were put in.
The heads have been refreshed with new springs, retainers, clips, and valveguides.
I just purchased a 720 gallon salt water aquarium and cannot afford both hobbies anylonger therefore the Z must
go.
I'm asking for $15K for the car which is a STEAL considering I have over $13K in just mods.
The car will come with the domain www.z28pwr.com, www.z28power.com and www.ls1pwr.com .
I'd like to sell it locally but if it doesn't then I will put it up on Ebay.
I can be contacted via email at z28pwr@yahoo.com
The car is a hardtop with 45,000 miles has tilt wheel, cruise control, power windows/locks AC, traction control and is a 6 speed.
The car put down 432 RWHP (500 FWHP) and 393 RWTQ.
The car ran 12.1 @ 118.60 MPH on street tires and will run 11's on slicks.
The car can be seen at www.z28pwr.com .
Currently the car sits on 98 C5 Corvette wheels but if you'd like I can swap them with some 00 SS wheels.
I've spent over 13K in just mods for this car.
The car has the following modifications:
MTI Stage II Heads
MTI T1 Cam
Z06 Intake
LS1 Motorsports Intake Lid
GMS MAF
Mac Headers
MTI Power Pulley
Whisper Ram Air
Pro 5.0 Shifter
Hurst Line Lock
Moser 12 Bolt With 3.73 Gears
HyperTech Power Programmer
MAF Translator
PowerSlot Rotors
Star Clutch Stage III Clutch (Brand New)
Mcleod Adjustable Master (Brand New)
Aftermarket Slave (Brand New)
and of course a K & N air filter
The transmission was rebuilt 800 miles ago and a new clutch, mcleod master and slave were put in.
The heads have been refreshed with new springs, retainers, clips, and valveguides.
I just purchased a 720 gallon salt water aquarium and cannot afford both hobbies anylonger therefore the Z must
go.
I'm asking for $15K for the car which is a STEAL considering I have over $13K in just mods.
The car will come with the domain www.z28pwr.com, www.z28power.com and www.ls1pwr.com .
I'd like to sell it locally but if it doesn't then I will put it up on Ebay.
I can be contacted via email at z28pwr@yahoo.com
Let's swap the 12 bolt for a ten bolt plus some cash!!!!!!!! I've got 4.10's installed plus a girdle. I'll do the swap!!!! Pleeeeease!!!!!
Last edited by the right formula; Dec 5, 2002 at 09:32 PM.
damn that sucks, well did you get the clutch working good? How did the slave work out? I put my master in and bleed it and feels good. Just wondering if I need to do the slave next. I probably will someone else to do that don't wanna bleed the clutch again. Well good luck selling it.
OMG, why couldn't u sell the car a few months from now! I just started working and I'm saving up to trade in my V6 for a Z28, and yours for $15,000?! That's a steal unless it's got major problems or something! And San Antonio isn't that far from Houston.
OMG, why couldn't u sell the car a few months from now! I just started working and I'm saving up to trade in my V6 for a Z28, and yours for $15,000?! That's a steal unless it's got major problems or something! And San Antonio isn't that far from Houston.
Originally posted by z28pwr
The car is in great condition you can come down and see it for yourself. I have receipts for all the work.
The car is in great condition you can come down and see it for yourself. I have receipts for all the work.
Originally posted by z28pwr
The car is in great condition you can come down and see it for yourself. I have receipts for all the work.
The car is in great condition you can come down and see it for yourself. I have receipts for all the work.
I couldn't possible come down knowing I couldn't buy the car... i'd 
But seriously, this is a way long shot, but if you would be able to let me finance remainder of the car (once I take my current car into CarMax or whatever, which I outta get around $10,000 for it) then I could afford it... but I doubt you'd wanna do financing, right?
Last edited by GrdLockV6; Dec 9, 2002 at 03:58 PM.



