Appearance Hoods, spoilers, custom mods, accessories, etc.

Pics of the Polished STB, Aluminum Carbon fuel rails, Stainless stuff

Thread Tools
 
Search this Thread
 
Old Oct 4, 2007 | 11:28 AM
  #1  
Megalis's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 516
From: SA, TX
Pics of the Polished STB, Aluminum Carbon fuel rails, Stainless stuff

Well I am far from finishing this engine bay up, but its getting there. I added:
*Hotchkis STB
*Stainless Steel Traction control box cover
*Stainless Steel Battery cover
*Stainless Steel Fuel rail cover strips with "camaro" etched in
*Aluminize Carbon Fiber fuel rails
*"LS1" head plate
*Billet Ktech Belt tensioner
*Custom TB plate for the 90mm intake (seen in the first pic behind the TB itself)
*Stainless air dam (not pictured for under the car, waiting for the fair to install don't want to damage it)

Looking for some valve covers, going to do the !wires thing as so as I find the write up, and I am making some polished aluminum stuff thats custom. Hope its ready by the State fair get together on the 20th









Last edited by Megalis; Oct 4, 2007 at 11:32 AM.
Old Oct 4, 2007 | 11:52 AM
  #2  
00ls100's Avatar
Registered User
 
Joined: Jan 2007
Posts: 199
From: NM
that looks really good. way better than mine. you just finalized my decision to get a hotchis STB
Old Oct 4, 2007 | 02:55 PM
  #3  
Irish350's Avatar
Registered User
 
Joined: Jul 2006
Posts: 239
From: Tempe/Phoenix
damn... not bad.

i think id personally paint the fast intake black and do the raised part in silver (vs the silver and red) but still, pretty mf-in good
Old Oct 4, 2007 | 04:46 PM
  #4  
Megalis's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 516
From: SA, TX
Originally Posted by Irish350
damn... not bad.

i think id personally paint the fast intake black and do the raised part in silver (vs the silver and red) but still, pretty mf-in good
Thanks guys...and I will actually have the intake painted in bright silver with the raised letters in black, or just shaved off completely.

That is if they don't make an aluminum carbon intake cover for the fast first. Then that will go on there I know they make one for the regular intake.
Old Oct 4, 2007 | 06:50 PM
  #5  
moroso99's Avatar
Registered User
 
Joined: Oct 2006
Posts: 354
From: Alpharetta, Ga
looks great. everything flows together.
Old Oct 5, 2007 | 04:03 AM
  #6  
Rashiki's Avatar
Registered User
 
Joined: Oct 2002
Posts: 511
From: NY
What kind of system ya got in there?
Old Oct 5, 2007 | 10:06 AM
  #7  
Megalis's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 516
From: SA, TX
Originally Posted by Rashiki
What kind of system ya got in there?
JVC Arsenal Head unit (200w)
2 Sets of Alpine component speakers (4- 6 1/2" and 4 Tweeters)
2 12" Dual Voice Coil MTX's (with an rms of 300w each, if I remember right)
1 -Autotek 700w amp for the 12's
1 -Autotek 300w amp for the Alpines
1 -3 Farad Digital capcitor

Not the best system in the world but more than enough for my taste. It's pretty loud and very very clear

Oh and my head unit has a USB port right in front, So I have a micro 4GB USB stick and have a crap load of songs. Dont have to worry about burning, or discs getting hot, scratched CD's...etc. Its the best!
Old Oct 5, 2007 | 11:30 AM
  #8  
lineybiker_11's Avatar
Registered User
 
Joined: Feb 2006
Posts: 90
From: Saginaw, Mi
I think I would do the wire and cable mod and that's about it very clean very nice
Old Oct 6, 2007 | 01:52 AM
  #9  
Rashiki's Avatar
Registered User
 
Joined: Oct 2002
Posts: 511
From: NY
Cool system I've got one in my Z that hit 145.5 a few years ago at a local comp, and that was with a few things that were going bad at the time! I'm sure it would have hit 146 had everything been where it needed to be, but the subs are old now, I doubt they'd hit that again without it being their last hurrah.

I was actually thinking of toning it down a little, but then again.. nahhhh:P
Old Oct 6, 2007 | 04:35 PM
  #10  
2000GTP's Avatar
Registered User
 
Joined: Mar 2005
Posts: 12,312
From: Aurora, IL
I love the fuel rail covers, looks awesome.
Old Oct 6, 2007 | 08:09 PM
  #11  
Megalis's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 516
From: SA, TX
Originally Posted by 2000GTP
I love the fuel rail covers, looks awesome.
And I only had to sell a kidney to get them! The one I got left works like a champ though! Now, I need the Textralia clutch...Hmm lets see what I got.....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HectorM52
Parts For Sale
26
Jul 30, 2017 11:46 AM
LT14LIFE
Parts For Sale
13
Feb 9, 2015 09:35 PM
rcajun86
Parts For Sale
1
Jan 30, 2015 01:56 PM
hotrodyou1
Cars For Sale
1
Dec 20, 2014 10:05 PM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM




All times are GMT -5. The time now is 03:28 PM.