1987 Oldsmobile Cutlass Supreme (FAST) 385
Thread Starter
Registered User
Joined: Sep 2000
Posts: 1,249
From: Kingman, AZ
1987 Oldsmobile Cutlass Supreme (FAST) 385
Posting this for a buddy of mine.
Thanks guys
Pics are HERE!
Now have pics of the interior and engine.
This is a 1987 Olds. Cutlass Supreme Brougham with a fresh sbc 385 cubic inch stroker wiht less than 8,000 miles. engine has edelbrock carb. Edelbrock Performer RPM intake, 58cc heads with 1.94/1.6 stainless valves with 3-angle valve job, fulley ported and polished, comp. cams extreme energy .487/.490 cam. 11:1 compression. wiht hypereutectic pistons, and high volume oil pump, engine still runs great. Desktop dyno shows 403 horsepower and 438 Lb. ft. of torque. Transmission is a TH-350 with shift kit and new clutches (shifts really quick and firm) with a 2800 stall converter. Rearend is a 4.10 posi with 28 spline Moser axles. exhaust is ceramic coated dynomax headers into 2.5" exhaust to 40 series flowmasters. car also has MSD 6A ignition, 5" monster tach with recall and shift light, B&M megashifter. body is in good shape great maroon paint. also included with car is a like new Weiand X-celerator single plane intake, 64cc 2.02 1.60 port matched and polished heads with 3-angle valve job (just bought, never put on) and a pair of 14x10 aluminum slot wheels. car has 3-way adjustable drag shocks(front and back), solid rear control arms ( also have brand new rear lift bars just bought for $200, never installed) new stiff rear coil springs. car has ran low 13's with bald street tires, with the new lift bars,heads,and intake car would easily run 12's. needing to sell going to college. wanting $3750 obo if interested please call 309-333-5755 (cell) or 309-837-2605 (home) Ask for Andy. Can also e-mail him at ss_monte_87@hotmail.com Car is loacted in Macomb, IL
Thanks guys
Pics are HERE!
Now have pics of the interior and engine.
This is a 1987 Olds. Cutlass Supreme Brougham with a fresh sbc 385 cubic inch stroker wiht less than 8,000 miles. engine has edelbrock carb. Edelbrock Performer RPM intake, 58cc heads with 1.94/1.6 stainless valves with 3-angle valve job, fulley ported and polished, comp. cams extreme energy .487/.490 cam. 11:1 compression. wiht hypereutectic pistons, and high volume oil pump, engine still runs great. Desktop dyno shows 403 horsepower and 438 Lb. ft. of torque. Transmission is a TH-350 with shift kit and new clutches (shifts really quick and firm) with a 2800 stall converter. Rearend is a 4.10 posi with 28 spline Moser axles. exhaust is ceramic coated dynomax headers into 2.5" exhaust to 40 series flowmasters. car also has MSD 6A ignition, 5" monster tach with recall and shift light, B&M megashifter. body is in good shape great maroon paint. also included with car is a like new Weiand X-celerator single plane intake, 64cc 2.02 1.60 port matched and polished heads with 3-angle valve job (just bought, never put on) and a pair of 14x10 aluminum slot wheels. car has 3-way adjustable drag shocks(front and back), solid rear control arms ( also have brand new rear lift bars just bought for $200, never installed) new stiff rear coil springs. car has ran low 13's with bald street tires, with the new lift bars,heads,and intake car would easily run 12's. needing to sell going to college. wanting $3750 obo if interested please call 309-333-5755 (cell) or 309-837-2605 (home) Ask for Andy. Can also e-mail him at ss_monte_87@hotmail.com Car is loacted in Macomb, IL
Last edited by hotrod18_69; Jan 15, 2005 at 05:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post