wanna help install a cam?

Azimiut · 06-19-2002, 01:04 AM

I would like to install a cc305 or a lt4 hot cam, but I would like some assistance. any one in scottsdale who would like to help? It would be greatly appreciated.
Also, I will be at the pavillions around 6:30. I probably will not have a spot near the show, so E-mail and we can meet. unless you want to save a spot.
if not, I would still like to talk to some locals from this board. E-mail me @ Matt@cahoons.com

------------------
1994 Camaro Z28 !CAGS-Moroso Cold Air Intake-Ported MAF-AZ Speed and Marine 52mm TB-1LE Elbow-Underdrive Pullies-Ported MAF-HI-6 Digital Ignition & LX92 Coil-B&M Ripper Shifter-RK Sport Headers-SLP Y Pipe-Random Tech Hi-flo Cat-Borla Adj Cat Back ( wide open)-160 Therm-'98 Front Brakes-Eibach Pro Kit With Blistein Suspension
!!!YOU CANT GET POWER FROM RICE!!!

Z-OwNEr · 06-19-2002, 11:29 AM

I might can come over to help. Could probably talk with Mike (KreinMC) if he's not doing anything and we could both come over. When were you looking to get this done. You have the tools and all?

------------------
1993 Purple Pearl M6 Z28

Jackstand Queen

Picture 1
Picture 2
Picture 3

Almost finished Forged 396, Pro Performance Heads, XE 236/242, F.A.S.T, Street Twin....the usual.

Azimiut · 06-19-2002, 02:06 PM

That would be great! I am sure I've got the hand tools. I was going to get an air set though. But before I can install a cam I need one. I just have to decide cc305 or lt4 hot cam. I just wanted to know if I could get some help. Thanks alot!!!
PS> will you be at the pavillions? Sat. around 6:30?

------------------
1994 Camaro Z28 !CAGS-Moroso Cold Air Intake-Ported MAF-AZ Speed and Marine 52mm TB-1LE Elbow-Underdrive Pullies-Ported MAF-HI-6 Digital Ignition & LX92 Coil-B&M Ripper Shifter-RK Sport Headers-SLP Y Pipe-Random Tech Hi-flo Cat-Borla Adj Cat Back ( wide open)-160 Therm-'98 Front Brakes-Eibach Pro Kit With Blistein Suspension
!!!YOU CANT GET POWER FROM RICE!!!

snksknr94 · 06-19-2002, 03:38 PM

Quote:

<font face="Verdana, Arial" size="2">Originally posted by Azimiut:
PS> will you be at the pavillions? Sat. around 6:30?
</font>

I might be up there, but probably not until after 7. Azimiut where do you usually cruise around at? I think I may have seen your car.

wantafastz28 · 06-19-2002, 06:31 PM

get the cc305

82az28 · 06-20-2002, 12:36 AM

how about a cam install day? i am wanting to put a different cam in my old 82 as well! when do you plan on doing it?

Andy in Mesa

------------------
82 z28, 350, fireball cam, performer intake, headers

Azimiut · 06-20-2002, 01:38 AM

I cruise north scottsdale, but I dont do it that often.
I need to buy the cam then we can have a install party! work on our cars, drink some beer, have some fun.
If we want to meet at the show, say in front of the Mcdonalds, say around 7:30? since the show will have started and little parking, I do not think that a spot near it will be possible.
If anyone else wants to do this E-MAIL me at Matt@cahoons.com we could arange a day and time.

------------------
1994 Camaro Z28 !CAGS-Moroso Cold Air Intake-Ported MAF-AZ Speed and Marine 52mm TB-1LE Elbow-Underdrive Pullies-Ported MAF-HI-6 Digital Ignition & LX92 Coil-B&M Ripper Shifter-RK Sport Headers-SLP Y Pipe-Random Tech Hi-flo Cat-Borla Adj Cat Back ( wide open)-160 Therm-'98 Front Brakes-Eibach Pro Kit With Blistein Suspension
!!!YOU CANT GET POWER FROM RICE!!!

Kreinmc · 06-20-2002, 02:28 AM

azimiut, why not just meet where everyone hangs out(near our cars)? your easily going to be able to find a parking spot at the show, it might not be with all of the fbody guys but i'm sure you can park within a row of us if you show up real late.

------------------
94 Formula-6spd, New Mods are cloyes double roller timing set, CSI WP, Opti conversion,PCMFORLESS tuning, Comp R lifters and cc306, Hurst Shifter, Moroso Cai, Msd Ignition, Flowmaster Exhaust, Mac Headers & y-pipe, offroad pipe, Crane 10308 spring kit, 1.6 Promagnum RR's
Dyno with headers and RR's!
297rwhp
328rwtq
13.2@112.65(stock heads, full weight, 92 degrees outside)

Azimiut · 06-20-2002, 03:47 AM

Damn those pop up adds!! anyhow that would be great! I guess I will see you all there.

------------------
1994 Camaro Z28 !CAGS-Moroso Cold Air Intake-Ported MAF-AZ Speed and Marine 52mm TB-1LE Elbow-Underdrive Pullies-Ported MAF-HI-6 Digital Ignition & LX92 Coil-B&M Ripper Shifter-RK Sport Headers-SLP Y Pipe-Random Tech Hi-flo Cat-Borla Adj Cat Back ( wide open)-160 Therm-'98 Front Brakes-Eibach Pro Kit With Blistein Suspension
!!!YOU CANT GET POWER FROM RICE!!!

JeffsCamaroZ · 06-20-2002, 11:20 AM

Do not worry about saving spaces. You are not allowed to after 4pm anyways

. I plan on showing up at the Pavillions around 5:30-6pm. Hope to see you guys there.

------------------
Jeff
98 Z28 13.4@107.3/312.3RWHP 324.9RWTQ
-direct flow air lid, K&N air filter, exhaust cutout w/ McCord power plate.
99 GTP 14.6@96
-K&N air filter, 3.25" pulley, Tranny cooler, 3" int. pipe with stock mufflers.

snksknr94 · 06-20-2002, 01:13 PM

Quote:

<font face="Verdana, Arial" size="2">Originally posted by Azimiut:
I cruise north scottsdale, but I dont do it that often.
</font>

Thats where I'm at as well, so I probably have seen your car.

82az28 · 06-20-2002, 03:39 PM

where at in N. Scottsdale?

verbs · 06-20-2002, 04:24 PM

Hotcam=****

Don't get it...underpowered and crappy idle.

------------------
2001 Blk/Blk Z28
363rwhp 372rwtq
Perf. Mods.-MTI lid, ASP pullies, true dual exhaust w/ x-pipe and bullet muffs , Grott headers, 12 bolt rear end w/ 3.73's, hurst shifter, !MAF screen, fast toys ram air, Carbon Fiber Driveshaft, McLeod Clutch, Alum. Flywheel, MAFT
12.5@112 1500ft., Density Altitude 4811ft

Kreinmc · 06-20-2002, 05:17 PM

The hotcam kit is a really good deal since it comes with everything you need for the cam swap besides the gaskets. it is a good cam for stock heads, but if you ever decide to get some nice heads the cam is going to be way to small. the 305 is a little bit bigger but i hear it is basically the same and it will cost probably an extra 500 bucks to do it.

------------------
94 Formula-6spd, New Mods are cloyes double roller timing set, CSI WP, Opti conversion,PCMFORLESS tuning, Comp R lifters and cc306, Hurst Shifter, Hotchkis Control Arms and Panhard Rod, Moroso Cai, Msd Ignition, Flowmaster Exhaust, Mac Headers & y-pipe, offroad pipe, Crane 10308 spring kit, 1.6 Promagnum RR's
Dyno with headers and RR's!
297rwhp
328rwtq
13.2@112.65(stock heads, full weight, 92 degrees outside)

Azimiut · 06-21-2002, 01:45 AM

****ing ADDS!!!!! so, I am along greenway, FLW blvd, and 64th ST. sometimes hayden too.

------------------
1994 Camaro Z28 !CAGS-Moroso Cold Air Intake-Ported MAF-AZ Speed and Marine 52mm TB-1LE Elbow-Underdrive Pullies-Ported MAF-HI-6 Digital Ignition & LX92 Coil-B&M Ripper Shifter-RK Sport Headers-SLP Y Pipe-Random Tech Hi-flo Cat-Borla Adj Cat Back ( wide open)-160 Therm-'98 Front Brakes-Eibach Pro Kit With Blistein Suspension
!!!YOU CANT GET POWER FROM RICE!!!