Machine shops

[thomas_quinn]

I have a block that needs to be bored soon. What places are there around.

------------------
79 Z28 350\4spd\3:90 posi almost done
69 Sport coupe have all sheet metal waiting.

[9SECONDLX]

horsepower engineering in ellington ct. near summers ct does great work. they do lots of busch north motors. 1 860 871 2020. i think that is there number. good luck



------------------
9 second street legal 1989 mustang lx, special effects purple, 306 Vortech t trim 20pds of boost, momo; seats-steering wheel and shifter knob, weld drag lites, stage 2 fuel system, cervini stormin normin hood and saleen wing, tfs ported heads and edelbrock rpm intake, 8pt cage.

new project, 1994 Z28, 383 stroker, 4 bolt block with bullet main caps, cola light weight crank, H beam eagle rods, je inverted pistons 9.2 compression with heads, comp cam custom grind cam and 1.6 non self-aligning rockers, afr stage 2 heads 58cc, fully ported LT1 intake powder coated LT4 red, 3 core race intercooler, polished procharger, 3:73 gears, custom torque arm, eibach springs, custom panhard bar and control arms, kyb agx adjustable shocks, ss hood, factory ss spoiler, 58mm bbk throttlebody, B&M ripper shifter, chrome zr1 rims, autometer phantom gauges, edelbrock headers,

[Rich97Z28]

Thomas,
Talk to Superior Machine. Rt.140 on Milford/Holliston line. They do a lot of drag car motors. I almost went to them for my headwork, but chickened out because they don't have a lot of LT1 head experience. But, for earlier stuff, they look like they know what they're doing.

[thomas_quinn]

Cool just finished striping the block today.