AtlantaChassisdyno....

96SS#1469 · 07-25-2002, 10:45 AM

Anyone ever taken their car there? Just curious what they were all about. I need my car tuned and was thinking about heading up there. Thanks, Mike

------------------
96SS/Z28
K&N CAI, LT4 Heads, LT4 Intake, Hot cam, LT4 Knock module, FLP Longtube Headers, Borla 3" Exhaust, Vigilante TC, 3:73 gears w/TA cover, MSD 6AL ignition, Taylor Pro wires, ASM 52mm Throttle body, Hypertech 160 Thermostat,TR Ported MAF ends, Underdrive pulley, Hotchkis panhard rod, strut tower brace, and trailing arms, chrome SS rims, bilstein shocks and struts, RK 2" drop springs, Baer cross drilled/slotted brakes w/ polished calipers, ED Wright Programming...

harleydog · 07-25-2002, 08:20 PM

mike,
I have had my whole engine and rear end built there. They also dyno tuned the car. They are very good at building high perfomance fbodys and stangs...thats all they do.

96SS#1469 · 07-26-2002, 08:24 AM

Sweeet! I appreciate the info. I will be headed there in the near future. Thanks, Mike

------------------
96SS/Z28
K&N Forced Air Induction, Hypertech 160 Thermostat,TR Ported MAF Ends, 1LE Elbow, 52mm AS&M Throttle Body, LT4 Intake, LT4 Heads, LT4 Knock Module, Hotcam, 1.6rr and springs, Taylor Pro Wires, MSD 6AL Ignition, FLP Long tube Headers, Borla Cat back Exhaust, Vigilante 2600 Torque Converter, Transgo/shift kit, 3:73 Gears, March Underdrive Pulley, Hotchkis Strut Tower Brace, Lower Control Arms, and Panhard Rod, Bilstien Shocks & Struts, RK "2 Drop Springs, Chrome "17 SS Rims, Chrome Alternator, Chrome Valve cover breather, LG Racing Pedals, White Gauge Faces, Baer cross drilled/slotted rotors and polished calipers, Rear slotted rotors, finally - Ed Wright programming...

harleydog · 07-26-2002, 09:30 AM

They are mentionend in the Sept. 2002 issue of GM Hi-Tech Performance Magazine as having tuned the car on the cover....the most awesome trans-am i have ever seen! Well, as a daily drive anyway.
Check it out here:
http://www.gmhightechperformance.com..._motives.shtml

96SS#1469 · 07-26-2002, 10:24 AM

Thanks man, that was a good article.
Mike

------------------
96SS/Z28
K&N Forced Air Induction, Hypertech 160 Thermostat,TR Ported MAF Ends, 1LE Elbow, 52mm AS&M Throttle Body, LT4 Intake, LT4 Heads, LT4 Knock Module, Hotcam, 1.6rr and springs, Taylor Pro Wires, MSD 6AL Ignition, FLP Long tube Headers, Borla Cat back Exhaust, Vigilante 2600 Torque Converter, Transgo/shift kit, 3:73 Gears, March Underdrive Pulley, Hotchkis Strut Tower Brace, Lower Control Arms, and Panhard Rod, Bilstien Shocks & Struts, RK "2 Drop Springs, Chrome "17 SS Rims, Chrome Alternator, Chrome Valve cover breather, LG Racing Pedals, White Gauge Faces, Baer cross drilled/slotted rotors and polished calipers, Rear slotted rotors, finally - Ed Wright programming...