Got a new car....

Behemoth · 07-14-2002, 03:51 PM

I a new car to tool around with... here it is
1990 GSX

forged internals,
16g turbo
and supporting mods.

I'm in the process of tuning it

later

Chuck D

TheZ · 07-14-2002, 08:22 PM

sweet ride

------------------
cai,borla,longtube headerz,3.73,nx nos 100 in garage lol 95 lt1 a4

camaro81 · 07-14-2002, 08:41 PM

dude
how big is your garage? :P hahaha

nice car! can't believe you got an LT4 vette, WS6, and a GSX :P you da man

Behemoth · 07-14-2002, 09:34 PM

thanks

I got rid of the vette...

c-yall around

Chuck D

r_west · 07-14-2002, 11:31 PM

It's a very cool car and is a blast to drive.

It definitely made me miss my GSX. Not quite enough to want to buy another one, but ALMOST enough.

Congrats Chuck!

------------------
93 Z28: built a4, 3.73's, 58mm tb, slp headers/ypipe/straight pipe, borla catback, ram air, Vigilante, hypertech chip/thermo, stb, msd coil, bmr subframes lca's and relocators, manual iat, !km
best full pass on street tires (pre-tc): 13.177 @ 107.21 (2.064 60 ft)
best full 1/8 on streets (pre-tc): 8.44 @ 84.23
For Sale: http://clubwest.dyndns.org/
91 GSX: SOLD!! AWD/16G/M5/All the goodies.

justforfun · 07-16-2002, 07:06 PM

Though you bought rich's old car for a sec.

Will there be a reinactment of "rich vs jeremy"?

Behemoth · 07-16-2002, 07:45 PM

Rich vs. Jeremy????? do tell Brian

justforfun · 07-16-2002, 10:01 PM

I seem to remember a story about a fairly even hwy race between Rich's GSX & Jeremy's Z. Does Jeremy still have his car?

NeilLT1 · 07-22-2002, 05:28 PM

If any of you guys know of anyone else wanting a real fast and reliable AWD talon I am thinking of selling mine to get an LS1. The car has a motor built by Pruven Performance, bored .020, 95+ pistons, machined rods, balance shafts removed, ported 95+ manifold, full 3 inch exhaust, MBC, Big 16g turbo, ported MAS, ACT 2600, ported O2 and possibly some other things that I cannot think of. I live in Greensboro if anyone is interested.

------------------
94 Z28, Mac headers,Y and offroad pipe, SLP 2OL, LPE CAI, 3.73, etc.

r_west · 07-25-2002, 08:34 PM

Brian: The story goes as follows.... Jeremy will tell you the same.

Rich and Jeremy start from a 65ish roll. Jeremy is in the right gear, Rich is in third with the turbo spooled.

- Both drop the hammer.
- Rich walks on Jeremy 1 length.
- Rich hits fuel cut and Jeremy catches up.
- Rich's car stops cutting, walks out another 1-1.5 lengths.
- Rich hits fuel cut again. Jeremy catches back up.
- Rich pulls again only to hit fuel cut.
- Race is over, run what you brung so it was pretty even.
- Rich looks down to notice he spilled his Coke all over himself.

There were some other races, but the little POS that could won those. This was the one that was a tie and the one that I get razzed on.

Neil: drop me a line.

------------------
93 Z28: built a4, 3.73's, 58mm tb, slp headers/ypipe/straight pipe, borla catback, ram air, Vigilante, hypertech chip/thermo, stb, msd coil, bmr subframes lca's and relocators, manual iat, !km
best full pass on street tires (pre-tc): 13.177 @ 107.21 (2.064 60 ft)
best full 1/8 on streets (pre-tc): 8.44 @ 84.23
For Sale: http://clubwest.dyndns.org/93z28/
91 GSX: SOLD!! AWD/16G/M5/All the goodies.