Wanted: abs module and comptuer from traction control LT1 car
#1
Wanted: abs module and comptuer from traction control LT1 car
I need a master cylinder, abs pump, abs computer (under dash), and the connectors that go into the pump and computer. Going to be used as parts for a school project. Email fabi9355@kettering.edu
#2
you want the abs controller with the master cylinder......(abs pump)??I have one of those master control pumps still attached to the master cylinder(not the brake booster)i dont have any other parts......Let me know what those items are worth to you as the controller is not a cheap item.....
Thanx
Jim
Thanx
Jim
#3
I need the master cylinder, and the abs and tcs pumps and solenoids that are mounted right by the master cylinder. If available I also need the abs computer that is mounted under the dash if available. I need the ends of the harnesses and connectors if possible. All of the items needs to be from an lt1 car with traction control.
I'm on a limited budget as this is for a computer engineering project at school, let me know what you would want for all the parts.
I'm on a limited budget as this is for a computer engineering project at school, let me know what you would want for all the parts.
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM