Need the following for 93-97 T/A...
#1
Need the following for 93-97 T/A...
I need:
foglight for formula
dash need both top and bottom
airbags, (pending)
If you have or can get any of these parts, I'd greatly appreciate it. Please LMK and how much. Thanks
foglight for formula
dash need both top and bottom
airbags, (pending)
If you have or can get any of these parts, I'd greatly appreciate it. Please LMK and how much. Thanks
Last edited by MaddHatter; 11-19-2003 at 10:40 AM.
#4
parts
I have a good steering wheel with one small mark on the back side which you cant see unless you look behind the wheel......I have the dash portion that goes around the cluster and under the steering column as well.......
Let me know if you want the wheel
Thanx
Jim
off a 95 z28
Let me know if you want the wheel
Thanx
Jim
off a 95 z28
#12
MaddHatter
I have a Red Front Bumper cover from my 96 WS6 Trans am. I also have a Great looking passenger side foglight assembly.
From Gm the Front bumper cover is $311.52 and the foglight assembly I believe is around $75.00 I may be wrong on the foglight assembly.
Send me a EMAIL if your interested. I was about to put these parts on ebay till I read your post. my car is stored for the winter.
The bumper cover you would have to get painted. My brother is a body man and he has told me for it to look perfect again it would needed to be primered, sanded and painted. A good bodyshop could do it for you very reasonably priced.
Email me if your interested. I also have headlight assembly's with motors and all with Brand new Xenon style headlight bulbs with updated housings so the bulbs would not melt the plastic.
I have a Red Front Bumper cover from my 96 WS6 Trans am. I also have a Great looking passenger side foglight assembly.
From Gm the Front bumper cover is $311.52 and the foglight assembly I believe is around $75.00 I may be wrong on the foglight assembly.
Send me a EMAIL if your interested. I was about to put these parts on ebay till I read your post. my car is stored for the winter.
The bumper cover you would have to get painted. My brother is a body man and he has told me for it to look perfect again it would needed to be primered, sanded and painted. A good bodyshop could do it for you very reasonably priced.
Email me if your interested. I also have headlight assembly's with motors and all with Brand new Xenon style headlight bulbs with updated housings so the bulbs would not melt the plastic.
Thread
Thread Starter
Forum
Replies
Last Post
alliance12364
General 1967-2002 F-Body Tech
6
09-17-2015 08:43 AM