LE1/LE2 or equivalent heads. Cash in hand!
05-11-2005, 08:53 PM
#1
Registered User
Thread Starter
Join Date: Jul 2001
Location: Kingsport, TN
Posts: 1,889
LE1/LE2 or equivalent heads. Cash in hand!
Let me know if you have anything along these lines. I'm ready to buy right now. PM me or loadre@hotmail.com
05-26-2005, 09:14 PM
#5
Registered User
Join Date: Mar 2002
Location: near waco tx.
Posts: 2,058
Re: LE1/LE2 or equivalent heads. Cash in hand!
are you still looking.
i have a head and cam combo. imight sell. the cam was ground by joe overton for the heads.
the heads have 2.05 int. valves and 1.57. exh. valves. and i do have the flow sheet.
vg: cfm intake 200
avg exhaust 145.5
lift int exh
.0500 36.5 27.0
.1000 67.4 50.6
.1500 104 78.7
.2000 138.6 166.2 ??? this must be a type O
.2500 167.4 128.0
.3000 194.4 144.5
.3500 224.3 156.5
.4000 245.0 167.3
.4500 259.7 174.1
.5000 268.6 180.7
.5500 273.7 186.3
.6000 276.4 190.2
.6500 277.4 192.5
.7000 274.2 194.4
the spring i have on the heads are not good enough for the cam, but i have a set of kmotion 800 springs that are goo to a 700 lift. that need to be put on. i havent put them on yet becuase all my engine parts havent arrived yet.
let me know if intrested
joe overton told me this head cam paksge should make 450 rwhp.
let me know if intrested
you can call me if you want at 254 747 2633
i have a head and cam combo. imight sell. the cam was ground by joe overton for the heads.
the heads have 2.05 int. valves and 1.57. exh. valves. and i do have the flow sheet.
vg: cfm intake 200
avg exhaust 145.5
lift int exh
.0500 36.5 27.0
.1000 67.4 50.6
.1500 104 78.7
.2000 138.6 166.2 ??? this must be a type O
.2500 167.4 128.0
.3000 194.4 144.5
.3500 224.3 156.5
.4000 245.0 167.3
.4500 259.7 174.1
.5000 268.6 180.7
.5500 273.7 186.3
.6000 276.4 190.2
.6500 277.4 192.5
.7000 274.2 194.4
the spring i have on the heads are not good enough for the cam, but i have a set of kmotion 800 springs that are goo to a 700 lift. that need to be put on. i havent put them on yet becuase all my engine parts havent arrived yet.
let me know if intrested
joe overton told me this head cam paksge should make 450 rwhp.
let me know if intrested
you can call me if you want at 254 747 2633
Thread
Thread Starter
Forum
Replies
Last Post
CARiD
Supporting Vendor Group Purchases and Sales
0
09-30-2015 05:44 AM
surreybrad
General 1967-2002 F-Body Tech
1
09-29-2015 09:00 PM