WTT my LT1 Phoenix 4L60E swap for your T56 swap.
05-16-2010, 12:28 PM
#1
Registered User
Thread Starter
Join Date: Mar 2002
Location: Missouri
Posts: 595
WTT my LT1 Phoenix 4L60E swap for your T56 swap.
Looking to go 6 speed so I figured I'd see if anyone was interested in a nice 4L60E. It's for an LT1 and I need LT1 6 speed parts.
Phoenix Transmission built 4L60E. Here is info from their site; I have all of the paperwork and the trans is stamped and converter has a sticker.
#PT4L60ESS
Our street/strip version of the 4L60E is designed for the performance enthusiast. This trans features our High performance pump, special valve body and servo assembly, steel bonded apply pistons, 29 element input sprag, special modified sun gear shell, increased clutch capacity and a host of other modifications. Comes with our Street/Strip torque converter with carbon clutch, furnace brazing, hardened hub, and stall speeds up to 2600 rpm. Rated to 425HP this is a great choice for Corvettes, F-bodies and Impala owners who modify their vehicles.
Will trade my complete auto swap (trans, crossmember, trans wiring depinned at PCM (no cuts so can be put in like factory), shifter, console insert, shifter cable, pedals, and I will reprogram your M6 PCM to run an auto or I will trade you my auto PCM for your M6 PCM, your choice. Your 6 speed swap must be complete and in good operating order. My trans has about 18,000 miles on it.
PM or post here if interested.
Phoenix Transmission built 4L60E. Here is info from their site; I have all of the paperwork and the trans is stamped and converter has a sticker.
#PT4L60ESS
Our street/strip version of the 4L60E is designed for the performance enthusiast. This trans features our High performance pump, special valve body and servo assembly, steel bonded apply pistons, 29 element input sprag, special modified sun gear shell, increased clutch capacity and a host of other modifications. Comes with our Street/Strip torque converter with carbon clutch, furnace brazing, hardened hub, and stall speeds up to 2600 rpm. Rated to 425HP this is a great choice for Corvettes, F-bodies and Impala owners who modify their vehicles.
Will trade my complete auto swap (trans, crossmember, trans wiring depinned at PCM (no cuts so can be put in like factory), shifter, console insert, shifter cable, pedals, and I will reprogram your M6 PCM to run an auto or I will trade you my auto PCM for your M6 PCM, your choice. Your 6 speed swap must be complete and in good operating order. My trans has about 18,000 miles on it.
PM or post here if interested.
Thread
Thread Starter
Forum
Replies
Last Post
Nostang 96z
Drag Racing Technique
4
09-14-2002 08:22 PM