TPIS zz9 cam for sale
#1
TPIS zz9 cam for sale
ZZ-9 HydraulicRoller LT1 & L98(700-136):
Intake Exhaust Advertised duration 282 287
Duration at .050 212 226
Gross lift .483 .520
Lobe separation 112
Those numbers are with 1.5 rockers. With 1.6 rockers the lift numbers are: .515/.555. Pics at http://photobucket.com/albums/e179/ajschult/ If you save the pic on the right and zoom in you can read the part #.
New this cam is $375. It has around 18k miles on it. Make an offer if interested.
Andrew
Intake Exhaust Advertised duration 282 287
Duration at .050 212 226
Gross lift .483 .520
Lobe separation 112
Those numbers are with 1.5 rockers. With 1.6 rockers the lift numbers are: .515/.555. Pics at http://photobucket.com/albums/e179/ajschult/ If you save the pic on the right and zoom in you can read the part #.
New this cam is $375. It has around 18k miles on it. Make an offer if interested.
Andrew
#2
Re: TPIS zz9 cam for sale
Originally Posted by ajschult
ZZ-9 HydraulicRoller LT1 & L98(700-136):
Intake Exhaust Advertised duration 282 287
Duration at .050 212 226
Gross lift .483 .520
Lobe separation 112
Those numbers are with 1.5 rockers. With 1.6 rockers the lift numbers are: .515/.555. Pics at http://photobucket.com/albums/e179/ajschult/ If you save the pic on the right and zoom in you can read the part #.
New this cam is $375. It has around 18k miles on it. Make an offer if interested.
Andrew
Intake Exhaust Advertised duration 282 287
Duration at .050 212 226
Gross lift .483 .520
Lobe separation 112
Those numbers are with 1.5 rockers. With 1.6 rockers the lift numbers are: .515/.555. Pics at http://photobucket.com/albums/e179/ajschult/ If you save the pic on the right and zoom in you can read the part #.
New this cam is $375. It has around 18k miles on it. Make an offer if interested.
Andrew
The popular roller cams(CC306, HOTCAM, etc) used go for around $150. Will you take $125 shipped for it? I have an old L98 motor in another car that would work good in.
Jeff
#6
Re: TPIS zz9 cam for sale
Originally Posted by ajschult
We've sinced learned that no bearings were spun. I am takingthe block in on saturday to be gone over I can have them take a look at the cam too if you want.
Are those pics of it when it was new or after you pulled it apart? Yes, have it checked and then get back to me ASAP.
Thanks,
Jeff
#8
Re: TPIS zz9 cam for sale
Originally Posted by ajschult
Those pics are after uninstall. To the naked eye it looks good, but I'll have them take a look at it on Sat.
Thanks, looking forward to hearing from you. So what was the demise of your motor if it wasn't a bearing?
Jeff
#9
Re: TPIS zz9 cam for sale
When we did heads/cam swap I went to Autozone for a new t-stat. They gave me a one for a sbc, not for an LT1 (Ihad already thrown the old one out so I didnt compare the old and the new). So as we were bleeding the cooling system it just kept getting hotter and hotter to the point where I shut it down when the gauge was just below red. Didnt realize the temp was not exactly accurate, its a little delayed. The car ended up overheating and warping the heads. I thought some bearings might have also got messed up, but we caught it in time. The motor is going in to have the pistons and walls checked, have the heads milled back to straight and fix anything else they may find. My car has been out of commision for almost a year now because of it.
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
02-09-2016 09:21 PM