Starting to part out 9 second Na combo, fast and top end
#1
Starting to part out 9 second Na combo, fast and top end
Fast EFI package:
FAST/Speed Pro box bought in 1999, the box is labeled Speed-Pro, as that is what they were called before it was renamed FAST. You will get ecm batch fire box, LT1 race harness set-up for a crank trigger, wide band o2 and calmap cable. The crank trigger is a custom Holley hal effect with an 8" wheel.
Selling for $1400
Top end package:
GM LT1 cylinder head castings, ported by Modern cylinder head, combustion camber and exhaust port coated y Dart coatings
Manley 5/16 SD valves with new comp springs, 1.55, 300lbs on the seat and Manely Ti locks & Ti ret, bead lock style
T&D shaft rockers,1.6 ratio, XL option, oil squirters
Smith Bros push rods 5/16 .083 wall cm
B&B valve covers
Selling for $2200
Can be sold with heads or after heads have been sold
Edelbrock Vic E converted to efi with fuel rails will fit my LT1 heads $500
Cam Motion solid roller 263/271 on a 108 $250
More parts will be available after heads sell
This combo went 9.71 @ 138 on motor
Reson I'm selling, I'm building a gen I SBC na motor to replace this motor, I just need to go faster.
FAST/Speed Pro box bought in 1999, the box is labeled Speed-Pro, as that is what they were called before it was renamed FAST. You will get ecm batch fire box, LT1 race harness set-up for a crank trigger, wide band o2 and calmap cable. The crank trigger is a custom Holley hal effect with an 8" wheel.
Selling for $1400
Top end package:
GM LT1 cylinder head castings, ported by Modern cylinder head, combustion camber and exhaust port coated y Dart coatings
Manley 5/16 SD valves with new comp springs, 1.55, 300lbs on the seat and Manely Ti locks & Ti ret, bead lock style
T&D shaft rockers,1.6 ratio, XL option, oil squirters
Smith Bros push rods 5/16 .083 wall cm
B&B valve covers
Selling for $2200
Can be sold with heads or after heads have been sold
Edelbrock Vic E converted to efi with fuel rails will fit my LT1 heads $500
Cam Motion solid roller 263/271 on a 108 $250
More parts will be available after heads sell
This combo went 9.71 @ 138 on motor
Reson I'm selling, I'm building a gen I SBC na motor to replace this motor, I just need to go faster.
#2
Re: Starting to part out 9 second Na combo, fast and top end
I'm interested in the intake. Can you send pics to unwrittenlaw6787@yahoo.com ?
What else would need to be done to fit it except for an elbow / intake tract?
What else would need to be done to fit it except for an elbow / intake tract?
#4
Re: Starting to part out 9 second Na combo, fast and top end
Can you please email me a number to reach you, My email is n4b2u@yahoo.com,Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Gtpguy
General 1967-2002 F-Body Tech
48
01-26-2015 04:50 PM