LT1 suspension parts, TA hood, front brakes, spindles, knock modules, PCMs and more
#1
LT1 suspension parts, TA hood, front brakes, spindles, knock modules, PCMs and more
I gathered up all of the LT1 parts in my garage and here is what I have:
Front spindles for '95 Trans Am, perfect shape, never hit any curbs or anything, no chance they are bent, these came off my car when I converted to LS1 brakes. $50 plus shipping.
Rear Springs, stock '95 TA springs p/n 22077421 Have about 70k miles on them. $20 plus shipping.
Front '95 LT1 brake calipers - $30 plus shipping
Brand new ceramic Pro Stop LT1 pads - $20 plus shipping
Rotors - probably cost more in shipping than they are worth, but if close by DFW area you can have them for free.
Boxed Lower Control arms - factory LCA's that have been boxed for '95 TA - $30 plus shipping.
Front wheel bearing assemblies with brake sensors - not certain why I have these, I think the sensor may be bad in one of them - $10 plus shipping.
Front and rear factory '95 TA sway bars - $20 ea plus shipping, the rear is heavy so shipping might be a lot.
Unknown KM p/n 16188709 - $10 plus shipping
Impala SS km p/n 16188309 - $10 plus shipping - I have 2 of these.
Front spindles for '95 Trans Am, perfect shape, never hit any curbs or anything, no chance they are bent, these came off my car when I converted to LS1 brakes. $50 plus shipping.
Rear Springs, stock '95 TA springs p/n 22077421 Have about 70k miles on them. $20 plus shipping.
Front '95 LT1 brake calipers - $30 plus shipping
Brand new ceramic Pro Stop LT1 pads - $20 plus shipping
Rotors - probably cost more in shipping than they are worth, but if close by DFW area you can have them for free.
Boxed Lower Control arms - factory LCA's that have been boxed for '95 TA - $30 plus shipping.
Front wheel bearing assemblies with brake sensors - not certain why I have these, I think the sensor may be bad in one of them - $10 plus shipping.
Front and rear factory '95 TA sway bars - $20 ea plus shipping, the rear is heavy so shipping might be a lot.
Unknown KM p/n 16188709 - $10 plus shipping
Impala SS km p/n 16188309 - $10 plus shipping - I have 2 of these.
Last edited by 2QUIK6; 11-23-2014 at 09:15 PM.
#2
#3
Re: LT1 suspension parts, TA hood, front brakes, spindles, knock modules, PCMs and mo
Rob, I'll take the LT4 KM if you still have it for sale. PM me your paypal. Let me know how your shipping (USPS ?)
Thanks!
Steve
Thanks!
Steve
#4
Re: LT1 suspension parts, TA hood, front brakes, spindles, knock modules, PCMs and mo
#6
Re: LT1 suspension parts, TA hood, front brakes, spindles, knock modules, PCMs and mo
steveh, sent you a pm, had a little accident in the garage. Looks like the LT4 and 1 of the Imp SS modules are no more. Sending you back a refund.
#7
Re: LT1 suspension parts, TA hood, front brakes, spindles, knock modules, PCMs and mo
Interested in the frt & rr swaybars with bushings, mounts, etc.
Is the front bar 32mm? What dia is the rear?
Please let me know shipping to 47025.
PM me if you wish.
thanks
Is the front bar 32mm? What dia is the rear?
Please let me know shipping to 47025.
PM me if you wish.
thanks
#8
Re: LT1 suspension parts, TA hood, front brakes, spindles, knock modules, PCMs and mo
The rear sway bar has all of the mounting hardware, end links, and rubber bushings with steel caps. Measured 17.6mm with the calipers, don't have a p/n but is was the stock '95 LT1 Trans Am convertible one.
Shipping to 47025 looks to be about $25, I'd take $55 shipped for both.
#9
Re: LT1 suspension parts, TA hood, front brakes, spindles, knock modules, PCMs and mo
Dangit, those are the same size bars as stock V6 cars. I was hoping yours from a TA would be an upgrade for my son's car.
Thanks anyway.
Thanks anyway.
#12
Re: LT1 suspension parts, TA hood, front brakes, spindles, knock modules, PCMs and mo
I never received a thread notification on this so I haven't been around since selling my car. I have a set of brand new ceramic / low dusting pads to go with those calipers, you can have them the set of caliper and the pads for $50 including shipping if you still need them.
Thread
Thread Starter
Forum
Replies
Last Post
Hurin
Suspension, Chassis, and Brakes
4
12-13-2014 07:38 PM
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM
Wilson
Car Audio and Electronics
0
07-21-2002 05:08 PM