LT1/LT4 parts (rare, aftermarket, stock)
09-29-2016, 07:13 PM
#1
Registered User
Thread Starter
Join Date: Jan 1999
Location: Rochester, NY USA
Posts: 3,051
LT1/LT4 parts (rare, aftermarket, stock)
Cleaning out more items from my garage:
-LT1/LT4 composite valvecovers, excellent condition and includes all mounting hardward and fittings SOLD
-LT1 McLeod Street Twin, low mileage (4k) but has some heat spots on the flywheels. The discs are excellent with not much wear. No adjustable master cylinder. The ring gear on the flywheel has 5 broken teeth. This would be great for parts or to use with a little attention. The clutch worked well when removed. Cheap. $200
-SLP 2TOL catback exhaust. Those who are familiar with this know that these are getting VERY difficult to find. I've had this for many years just holding on to it. Overall it's in good shape. Has around 60k miles. I purchased this from a guy in Texas years ago so it's off a southern rust-free car. The previous owner cut the exhaust in a couple places so it will need to be rewelded. The tail pipes are in fantastic condition. This is the best (and lightest) catback for 4th gen F-bodies (in my opinion, and MANY others) $375
-AC Delco A/C compressor, very nice shape with only 4k miles. Replaced a few years ago and has very little use. $125
-GM "1LE" rear springs. Low mileage, great shape. $30
I'll be adding more parts to this list this weekend. Pictures will also be added in the next couple days.
-LT1/LT4 composite valvecovers, excellent condition and includes all mounting hardward and fittings SOLD
-LT1 McLeod Street Twin, low mileage (4k) but has some heat spots on the flywheels. The discs are excellent with not much wear. No adjustable master cylinder. The ring gear on the flywheel has 5 broken teeth. This would be great for parts or to use with a little attention. The clutch worked well when removed. Cheap. $200
-SLP 2TOL catback exhaust. Those who are familiar with this know that these are getting VERY difficult to find. I've had this for many years just holding on to it. Overall it's in good shape. Has around 60k miles. I purchased this from a guy in Texas years ago so it's off a southern rust-free car. The previous owner cut the exhaust in a couple places so it will need to be rewelded. The tail pipes are in fantastic condition. This is the best (and lightest) catback for 4th gen F-bodies (in my opinion, and MANY others) $375
-AC Delco A/C compressor, very nice shape with only 4k miles. Replaced a few years ago and has very little use. $125
-GM "1LE" rear springs. Low mileage, great shape. $30
I'll be adding more parts to this list this weekend. Pictures will also be added in the next couple days.
Last edited by Jason Short; 10-10-2016 at 07:13 PM.
10-10-2016, 09:54 PM
#3
Registered User
Join Date: Oct 2008
Location: Back in Minot, ND
Posts: 190
Re: LT1/LT4 parts (rare, aftermarket, stock)
If anyone is wondering a new steel flywheel is online for $444 shipped / McLeod PN# 460350. I was looking at the setup but I'm going auto.
Bump for some good parts.
Bump for some good parts.
11-03-2016, 09:33 PM
#5
Registered User
Join Date: Oct 2002
Location: Detroit, MI
Posts: 1,129
Re: LT1/LT4 parts (rare, aftermarket, stock)
Jason its been a really long time! Hey I am in need of a 4th gen hood latch assembly (cable, latch, bracket that holds it, etc). Any idea? I tried to un winterize my car this year and when I pulled the cable...SNAP. Well it was a horrible evolution to get the hood up...but I did and now it's time to try to get it back down.
Thanks man!
Charlie (formerly oneqwikz)
Thanks man!
Charlie (formerly oneqwikz)
Thread
Thread Starter
Forum
Replies
Last Post
Jason Short
Parts For Sale
3
12-05-2015 06:31 PM