LT1 Cam, Alt Underdrive Pulley, Bare Plug Wires
07-07-2013, 02:07 PM
#1
Registered User
Thread Starter
Join Date: Mar 2002
Location: Waynesboro, PA
Posts: 4,827
LT1 Cam, Alt Underdrive Pulley, Bare Plug Wires
Few things for sale here:
Custom LT1 Camshaft -- Designed in 2006 by BRE for Lloyd, this is a blower and N/A camshaft. Specs are 234/244 @ .050, .610/.610 lift on a 1.6 rocker, 110* LSA, 108* ICL. Has in the area of 1000 miles on it. Only removed for a more turbo friendly camshaft. Cam made 767/712 RWHP on 20lbs boost with a bad tune and poor boost control. Better tune, good control but unable to keep gate closed made 690 RWHP on a mustang dyno last year at 15lbs boost. Would do really good in a blower car or make a good N/A cam also. Long dowel pin for Vented opti applications. $250 shipped
Bare plug wires -- Good for 24x converts or LS1 guys -- Taylor 8mm SpiroPro wires, black. Shortest length is 23", longest is around double that. Boots for both ends will run about $35 at summit. Save some cash and DIY. $20 shipped
Custom LT1 Camshaft -- Designed in 2006 by BRE for Lloyd, this is a blower and N/A camshaft. Specs are 234/244 @ .050, .610/.610 lift on a 1.6 rocker, 110* LSA, 108* ICL. Has in the area of 1000 miles on it. Only removed for a more turbo friendly camshaft. Cam made 767/712 RWHP on 20lbs boost with a bad tune and poor boost control. Better tune, good control but unable to keep gate closed made 690 RWHP on a mustang dyno last year at 15lbs boost. Would do really good in a blower car or make a good N/A cam also. Long dowel pin for Vented opti applications. $250 shipped
Bare plug wires -- Good for 24x converts or LS1 guys -- Taylor 8mm SpiroPro wires, black. Shortest length is 23", longest is around double that. Boots for both ends will run about $35 at summit. Save some cash and DIY. $20 shipped
Last edited by Fastbird93; 07-08-2013 at 07:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
94z28jbw
Site Help and Suggestions
2
09-08-2002 03:22 PM