LT1 383 complete engine 550HP comes with 100 shot Nitrous Works kit $4950
#1
LT1 383 complete engine 550HP comes with 100 shot Nitrous Works kit $4950
LT1 383 complete engine 550HP comes with 100 shot Nitrous Works kit
Link to racing junk ad SBC LT1 383 stroker 93 to 97 Camaro Trans Am for Sale in UPLAND, CA | RacingJunk Classifieds
This Engine is freshly assembled and blueprinted
SPECS
Block is hand picked virgin core, block was cleaned and magged for cracks, all specs checked, bored and finish honned to +030
Heads are LT1 "374" castings with hand ported intake and exhaust's runners (20+ extra CFM), larger stainless 1 piece ewirl polished valves 2.00/1,570 and seat were cut with special 3 angle cutters, guides were cut for seals and heads assembled with Comp Cams Spring and hardware
Scat 9000 cast steel crankshaft 3.750 stroke, Rotating assembly precision balanced
Forged 4340 light weight Engine Tech H beam rods with ARP bolts
Hypertectic dished Summit Racing pistons (made by Keith Black)
King Performance bearings
Pro Products harmonic balancer keyed with degree marks
flexplate balanced
Speedpro Moly rings
Cam bearings and freeze plugs installed
Custom ground Hyd Roller cam & Roller lifters
Cloyes true roller timing set
Comp Cams chrome moly push rods
SI stainless 1 piece swirl polished larger valves 2.00/1.570
Crane GOLD full roller Alum rockers
Hi Volume oil pump
Ported intake to match heads and bored out for 58mm throttle body
Professional Products 58mm throtle body
Polished Alum valve covers
Hi-Performance Optispark Distributor (pictured separatly)
Hi-Flow water pump (pictured separatly)
Engine assembled with ALL exterior bolts in STAINLESS STEEL allen style
Nitrous Works 100HP NOS ststem with 10lb bottle and remote bottle opener(operates on a switch to open/close NOS bottle, so you can arm from driver seat )
This Engine was assembled and BLUEPRINTED to exact specs by Hardrcore Racing Engines & Parts by a professional engine builder with 35 years experience, all bearing clearances are set to .0028" clearance and ring gaps set to TOP .024 2nd .022 Oil ring .018, compression with the dished pistons is 10.8:1 and good for running on 91octane gas with no detonation or overheating problems.
we have estimated this combo can easily make 450+HP on the motor and 550HP with the 100 shot of NOS
$4950+ Shipping call or text Andy 909 851 8251
Link to racing junk ad SBC LT1 383 stroker 93 to 97 Camaro Trans Am for Sale in UPLAND, CA | RacingJunk Classifieds
This Engine is freshly assembled and blueprinted
SPECS
Block is hand picked virgin core, block was cleaned and magged for cracks, all specs checked, bored and finish honned to +030
Heads are LT1 "374" castings with hand ported intake and exhaust's runners (20+ extra CFM), larger stainless 1 piece ewirl polished valves 2.00/1,570 and seat were cut with special 3 angle cutters, guides were cut for seals and heads assembled with Comp Cams Spring and hardware
Scat 9000 cast steel crankshaft 3.750 stroke, Rotating assembly precision balanced
Forged 4340 light weight Engine Tech H beam rods with ARP bolts
Hypertectic dished Summit Racing pistons (made by Keith Black)
King Performance bearings
Pro Products harmonic balancer keyed with degree marks
flexplate balanced
Speedpro Moly rings
Cam bearings and freeze plugs installed
Custom ground Hyd Roller cam & Roller lifters
Cloyes true roller timing set
Comp Cams chrome moly push rods
SI stainless 1 piece swirl polished larger valves 2.00/1.570
Crane GOLD full roller Alum rockers
Hi Volume oil pump
Ported intake to match heads and bored out for 58mm throttle body
Professional Products 58mm throtle body
Polished Alum valve covers
Hi-Performance Optispark Distributor (pictured separatly)
Hi-Flow water pump (pictured separatly)
Engine assembled with ALL exterior bolts in STAINLESS STEEL allen style
Nitrous Works 100HP NOS ststem with 10lb bottle and remote bottle opener(operates on a switch to open/close NOS bottle, so you can arm from driver seat )
This Engine was assembled and BLUEPRINTED to exact specs by Hardrcore Racing Engines & Parts by a professional engine builder with 35 years experience, all bearing clearances are set to .0028" clearance and ring gaps set to TOP .024 2nd .022 Oil ring .018, compression with the dished pistons is 10.8:1 and good for running on 91octane gas with no detonation or overheating problems.
we have estimated this combo can easily make 450+HP on the motor and 550HP with the 100 shot of NOS
$4950+ Shipping call or text Andy 909 851 8251
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
02-09-2016 09:21 PM
TheGreenZ28
Exhaust System
0
12-06-2014 10:23 PM