Lots of parts for sale (Bored and honed block, pacesetter)more!!!!
02-13-2006, 04:13 PM
#1
Registered User
Thread Starter
Join Date: Sep 2005
Posts: 268
Lots of parts for sale (Bored and honed block, pacesetter)more!!!!
Guys, as my project has evolved some of the original or parts we are not going to use have become available. I will list prices on some parts. If a part is not listed with a price make a reasonable offer for them. I have no idea as to the value of some of the parts. These parts were all in good working order when removed and have been stored in a clean dry place.
LT1 Block, bored and honed. Clean ready for assembly (bored 60 over)-- 300
4l60E Transmission, Oil came out nice and clean, shifts hard, no slipping.This is not a core, it is ready to install--500
Pacesetter coated, race style, long tube headers, took out of box to look at, never used, includes gaskets and hardware---350.00 Sold!!!
Vented Opti--125.00, worked great, 18k on it. SOLD!!
Stock timing chain with gears, brand new--60.00
Vehicle PCM (computer)---100.00 On EBay SOLD!!!
Full Wiring Harness---150.00 On EBay
LT4 Knock module, never used in package--30 Sold!!!!
MSD Blaster Coil, never used in package--30 Sold!!!!
Elite Spark Plugs Blue OTVC wires, new in package---60 SOLD!!!
Fuel Rails with regulator--75 SOLD!!!
Stock de-screened MAF, worked fine no problems--SOLD
Stock water pump---make offer
Stock Radiator---make offer
LT1 stock intake manifold--- On EBay
MSD wire adapter from coil to MSD box, new in box--15.00
AC Delete Pulley, never used--SOLD!!!
Crower cam,specs are: Adv duration 277/286 .534.549 114LS Dur @ .050 225/232,brand new never put in the vehicle,still in package, 200
I will add more parts if I think of them. As I said above, some of the parts value are not known to me, if I overshoot a price, feel free to call me on it. I don't have time to check every single part's value so I may be off on some. All prices are plus actual shipping cost. Obviously, if you are in the Cleveland or Akron, Ohio area that would be better as far as the block and trans are concerned.
I would prefer Paypal for the payments but you can send me a money order too if you prefer. In three days I will list some of the items on Ebay if there is no interest here so let me know quickly if you are interested.
you can also reach me at gerald.minissale@cingular.com
LT1 Block, bored and honed. Clean ready for assembly (bored 60 over)-- 300
4l60E Transmission, Oil came out nice and clean, shifts hard, no slipping.This is not a core, it is ready to install--500
Pacesetter coated, race style, long tube headers, took out of box to look at, never used, includes gaskets and hardware---350.00 Sold!!!
Vented Opti--125.00, worked great, 18k on it. SOLD!!
Stock timing chain with gears, brand new--60.00
Vehicle PCM (computer)---100.00 On EBay SOLD!!!
Full Wiring Harness---150.00 On EBay
LT4 Knock module, never used in package--30 Sold!!!!
MSD Blaster Coil, never used in package--30 Sold!!!!
Elite Spark Plugs Blue OTVC wires, new in package---60 SOLD!!!
Fuel Rails with regulator--75 SOLD!!!
Stock de-screened MAF, worked fine no problems--SOLD
Stock water pump---make offer
Stock Radiator---make offer
LT1 stock intake manifold--- On EBay
MSD wire adapter from coil to MSD box, new in box--15.00
AC Delete Pulley, never used--SOLD!!!
Crower cam,specs are: Adv duration 277/286 .534.549 114LS Dur @ .050 225/232,brand new never put in the vehicle,still in package, 200
I will add more parts if I think of them. As I said above, some of the parts value are not known to me, if I overshoot a price, feel free to call me on it. I don't have time to check every single part's value so I may be off on some. All prices are plus actual shipping cost. Obviously, if you are in the Cleveland or Akron, Ohio area that would be better as far as the block and trans are concerned.
I would prefer Paypal for the payments but you can send me a money order too if you prefer. In three days I will list some of the items on Ebay if there is no interest here so let me know quickly if you are interested.
you can also reach me at gerald.minissale@cingular.com
Last edited by jerrysta; 02-24-2006 at 08:00 AM.
02-13-2006, 06:24 PM
#4
Registered User
Thread Starter
Join Date: Sep 2005
Posts: 268
Re: Lots of parts for sale (Bored and honed block, pacesetter)more!!!!
Sorry guys, it's a 95. I added a few parts, too.
Opti (only 18k on it, worked great)
Brand new stock timing set and timing cover with gears
Opti (only 18k on it, worked great)
Brand new stock timing set and timing cover with gears
02-14-2006, 10:25 AM
#10
Registered User
Join Date: Mar 2004
Location: Connecticut
Posts: 2,125
Re: Lots of parts for sale (Bored and honed block, pacesetter)more!!!!
Originally Posted by Critter
put me on line for the pacesetters' they have emmisions crap also y pipe?
02-14-2006, 11:16 AM
#11
Registered User
Thread Starter
Join Date: Sep 2005
Posts: 268
Re: Lots of parts for sale (Bored and honed block, pacesetter)more!!!!
TA 396. The knock sensor is yours. I don't know if it would ship today because I'm stuck at work but it would absolutely ship tomorrow. Today is possible I just can't guarantee it.
Send me a PM about payment.
Send me a PM about payment.
02-14-2006, 03:02 PM
#15
Registered User
Thread Starter
Join Date: Sep 2005
Posts: 268
Re: Lots of parts for sale (Bored and honed block, pacesetter)more!!!!
The knock module is currently promised to TA396. If he does not take it it's yours, jtcz28.
Sorry about the mix up in the pm's. Don't send me any money until I figure if TA396 is taking them, we have a pending arrangement.
Sorry about the mix up in the pm's. Don't send me any money until I figure if TA396 is taking them, we have a pending arrangement.