FS: Vortech Aftercooler For 93-97 LT1 F-Body
01-25-2006, 09:58 AM
#1
Registered User
Thread Starter
Join Date: Dec 1969
Location: Morton Grove, IL.
Posts: 78
FS: Vortech Aftercooler For 93-97 LT1 F-Body
I am selling the aftercooler set up from my car. The system has MANY upgrades over the stock kit that Vortech sells which makes it work much better. There are rougly 4000 miles on my setup and everything is in excellent working condition. Here is what is included:
* the aftercooler unit
* all tubing from the blower to the unit, and from the unit to the throttle body. This includes the 90* satin finish elbow piece that normally comes with the stock Vortech supercharger. Mine has already been cut to fit the after cooler tubing, so that will save you time and you can keep your stock elbow untouched.
* an UPGRADED Shur-Flo pump that will kick the crap out of the pump that Vortech supplies you with. This thing ROCKS!
* the UPGRADED water tank, Vortech P/N 8N105-010
* an UPGRADED super-duty sized heat exchanger, 3x the size Vortech supplies. Helps cool the water/antifreeze much better.
* all hoses, clamps and fittings that I needed to use, PLUS all the ones that are new that I did not. You get it all. We're talking probably over $100 in hoses alone.
* heat shield jackets for the unit and one of the tubes.
* original Vortech instruction booklet.
This system worked very well for me with no problems whatsoever and cool air temps even in summertime, but I am changing the direction of the car a little bit so it is no longer needed. Including the price of the Vortech aftercooler kit, I would venture to say that I have well over $2200.00 invested into this system and it would cost at least that to duplicate. If your looking for an ultimate aftercooler setup, this is it!
$1300.00
Email me at ZBass28@aol.com if interested.
* the aftercooler unit
* all tubing from the blower to the unit, and from the unit to the throttle body. This includes the 90* satin finish elbow piece that normally comes with the stock Vortech supercharger. Mine has already been cut to fit the after cooler tubing, so that will save you time and you can keep your stock elbow untouched.
* an UPGRADED Shur-Flo pump that will kick the crap out of the pump that Vortech supplies you with. This thing ROCKS!
* the UPGRADED water tank, Vortech P/N 8N105-010
* an UPGRADED super-duty sized heat exchanger, 3x the size Vortech supplies. Helps cool the water/antifreeze much better.
* all hoses, clamps and fittings that I needed to use, PLUS all the ones that are new that I did not. You get it all. We're talking probably over $100 in hoses alone.
* heat shield jackets for the unit and one of the tubes.
* original Vortech instruction booklet.
This system worked very well for me with no problems whatsoever and cool air temps even in summertime, but I am changing the direction of the car a little bit so it is no longer needed. Including the price of the Vortech aftercooler kit, I would venture to say that I have well over $2200.00 invested into this system and it would cost at least that to duplicate. If your looking for an ultimate aftercooler setup, this is it!
$1300.00
Email me at ZBass28@aol.com if interested.
Thread
Thread Starter
Forum
Replies
Last Post