Forged piston rotating assembly
#1
Forged piston rotating assembly
For a 350 chevy, 1 piece rear main seal block. Will work in L98, LT1 etc. Stock crank, magged, mic'd, checked for straight, oil holes chamferred, -.010/-.010, still in the bag from the machine shop! Rods are LT1 rods, ARP bolts, shot peened, pin fit and big ends were sized. Pistons are TRW Forged flat tops. Will keep stock compression ratio as long as the block/heads aren't decked or milled. Crank is like new, rods/pistons are in excellent+ shape. Had 12k miles on them. If you're interested email me at dialed_in_transam@yahoo.com
$275+shipping.
$275+shipping.
Thread
Thread Starter
Forum
Replies
Last Post