10 Bolt w/Eaton, 3.73, welded, rear cover...
11-19-2012, 01:18 PM
#1
Registered User
Thread Starter
Join Date: Jan 2009
Location: Massachusetts
Posts: 777
10 Bolt w/Eaton, 3.73, welded, rear cover...
Gauging interest in my 10 bolt rear. I had the axle tubes professionally welded to the center section for added strength, it has rear cover with bearing cap support, solid pinion spacer, and I just put in a low mileage Eaton posi unit. 3.73 gears. Will be taking out this weekend if someone is interested I will take pictures. I have about $700 into it and would like to get $500. No noise at all, dragged with this rear, with the exception of the new Eaton, for the last three years into the mid 1.5's 60 foot time pulling both front wheels with no issues what-so-ever. Only changing because I got a killer deal on a 12 bolt.
11-22-2012, 05:22 PM
#2
Registered User
Join Date: Jul 2002
Location: Kissimmee, Fl, USA
Posts: 1,942
Re: 10 Bolt w/Eaton, 3.73, welded, rear cover...
11-26-2012, 06:30 PM
#4
Registered User
Thread Starter
Join Date: Jan 2009
Location: Massachusetts
Posts: 777
Re: 10 Bolt w/Eaton, 3.73, welded, rear cover...
Pics added. LS1 style brakes will stay on for an addition $50, calipers, drilled/slotted rotors, and pads. All which have about 6k miles.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM